Who LOVES their under $ 1000 table combination ?

In my answer of 2/6/08 I was referring to a Conrad Johnson Sonograph SG-3.

How about the Project RM-5 with a Grado Prestige Gold ? Any thoughts ?

About a year and a half ago, I purchased a Goldring GR 1.2 turntable from Audio Advisor for $299.95 delivered to my door. This table is nothing more or less than a Rega P 2 on a different plinth. Came with the Rega RB 250 tonearm and included a Goldring Electra phono cartridge. Only upgrade to this has been the Rega glass platter that I had from years gone by, as well as a Herbie mat from sometime ago. So no additional cost there.

This has been my daily driver and averages about 30 hours per week in use. Zero problems with it. It replaced a Rega P 3 which was tweaked out with most all of the aftermarket accessories such as acrylic platter,deep groove sub platter, Michell tonearm counter weight, etc.

This was to be an interim unit as I decided what table next. Well some 18 months later I continue to use the Goldring and have found out for its paltry price is a stellar performer at its price/performance ratio. I know of nothing at the $299.95 delivered price that can compete with it.

At the very least now I can move up to another table and transfer the Rega arm to the next table. Such as a VPI Scout without tonearm. The Rega RB 250 tone arm will accomodate a wide variety of phono cartridges, so whatever I choose compatability will not be a issue.

Like the Rega P2 the Goldring GR 1.2 beauty is in its simplicity, low maintenace and arguably one of the finest tone arms ever produced. Value and performance does not have to break the bank.

4-02-08: Ferrari
About a year and a half ago, I purchased a Goldring GR 1.2 turntable from Audio Advisor for $299.95 delivered to my door. This table is nothing more or less than a Rega P 2 on a different plinth. Came with the Rega RB 250 tonearm and included a Goldring Electra phono cartridge. Only upgrade to this has been the Rega glass platter that I had from years gone by, as well as a Herbie mat from sometime ago.

So it's a real RB250, and therefore upgradeable via the Michell or Origin Live routes? Have you thought about getting the metal stub and denser counterweight for the tonearm--either the Michell or Origin Live?

I ask because a a friend bought one of these on my recommendation and I'd like to recommend cost-effective tweaks to this 'table as he gets the urge to extract more music from the grooves.

No the GR 1.2 is factory stock, with exeption of the glass platter and the Herbie mat.

Think I will order the Pete Riggle counter weight for the arm. Have heard good things about that upgrade.