Teres 265 or 320 vs. Sota Cosmos


I am looking at picking up a new Turntable. As of right now I'm guessing either would be equipped with a Triplaner arm and the ZYX Airy 2.

BUT anyway has anyone had the chance to do a direct comparison between these models? What differences did you notice, and how would you compare them?

Any insight would be appreciated!
128x128nrchy
Nate,

I've been waiting patiently for a short report but you must be glued to the sweet spot! I know your table is on a par with some of the best and that arm and cartridge will stun you right out of the box. Your phono stage is very, very good as well and is a keeper. My guess is that you'll post or call when you pick your chin up off the floor. Maybe there's a chiropractic manipulation that'll help.... ;)
There's nothing good to report right now, thus the silence. Something is not right.
Patience! Take your time! (I'm trying to be being positive here) IMLE, it's usually something I overlooked.
Nrchy,Could you elaborate as to what the current problem is.If any.As someone who went through a wait,last year,I may be able to offer some help/support!
I have found and eliminated a series of problems. The issue currently is that the arm lift assembly is sitting on top of the Cosmos chassis when the VTA is correct. To raise the arm enough requires me to set the VTA too high. I have been in contact with Kirk and am waiting his response as we speak.

There is very little bass present in the set up right now. I know that the cartridge has a ways to go before it is able to reproduce good deep bass, but still...

I would appreciate any insight you might offer. I know this is not just a mismatch between the TriPlanar and the Cosmos since Sota uses the same combination at CES and other venues. I'm at a loss.