Phono Stage - Gold Note PH -10 & PSU 10 power supply ? or comparable


I'm upgrading my tube ARC pre-amp and looking for your experience with Phono Stage units, please.  Although I've had several pre-amps, I haven't had a pre-amp that's only line stage and a separate phono stage unit. Love my vinyl and have a $5K MC Cartridge Considering Gold Note. Perhaps the PH-10 or PH-5.2 w/respective power supplies.

My TT rig is ~ $14k and considering a ~$20K list pre amp but they're all line stage only.
Is $ 4.5K-$5  a good target price point for a phono stage?
I really don't want to go to $7-10K+ range.
What  is a good price pt. guideline for a better phone stage?
Looking for  recommendations and guidance
Thanks

blue_strat
Post removed 

Your choice of a high end phono preamp depends on the type of cartridge you have, specifically the output.  If you have one of the lower output MC cartridges, ie below .5mv, I would consider the Paradox Signature Phono 70.

See Michael Fremer's review of this $3000 phono preamp.  Fremer's analog front end system is extraordinarily expensive.  If something sounds really good on his system you can pretty much bet it is a contender.

I have this phono preamp in my system and it is an extraordinarily good match with my low output Ortofon A95 cartridge.

Good luck with your search.

Hi

I had the Goldnote PH10 and psu and was so pleased with it I upgradd to the PH1000 and matching psu.

Can strongly recommend both Very good natural sound, versatile and easy to use

I have a Zesto Andros Deluxe II that I'm very happy with.  It cost me $8,300, and it's tubed.  They have a simpler version that goes for $5,900.  As someone else mentioned, Sutherland is a good alternative if you want to go with a solid state unit.

@tomic601 I looked at the ARC Ref Phono 2SE specs and the gain settings are pretty limited. So you would have to have a cartridge that matches well with this unit. For example my LOMC with 0.4mv output requires 60db of gain. With ARC because I would run XLR out the specs are 51dB (Low), 74dB (High) at1kHz BAL

So it wouldn’t be a good fit. Am I on the right track here?