@lalitk I decided to return the Lepro light due to it being a liability around my components with the base that can’t be secured in place.
Search for the light continues...
Stylus cleaners
I used to use Onzo ZeroDust with my first few cartridges years ago. With the last two cartridges, Hana ML, I have only been using the included Hana brush for every side of LP and the MoFi LP-9 liquid stylus cleaner (I get as much fluid out of the brush by pressing it against the neck of the bottle before I clean stylus) every 3-4 records.
Onzo is collecting dust especially since the Fremer’s The Tracking Angle article.
I’ve been looking at DS Audio ST-50 but at $80 I’m not sure it will do anything better than my current cleaning methods.
What’s your stylus cleaning routine?
- ...
- 185 posts total
I think it is safest to say a Cartridge left alone is a safe Cartridge. A Cartridge put into service is exposed to a set of required procedures, that from a slight user misjudgement or user error, is quite easily incurring a damage. A Cartridge used and in need of achieving good fettle or to be fettled with, becomes the Cartridge that is at highest risk of incurring a damage. There is no solid sound advice to be offered, but Good Luck. If you don't know, you don't know and the individuals not knowing is the usually a cause of the damage when being reported on. |
@lalitk very nice! Looking forward to it. |
- 185 posts total