Next upgrade to an entry-level system?


Currently my system consists of:

  • AT-LP120 turntable (with the shibata stylus)
  • A-S301 integrated amp
  • RP-500M II speakers
  • RSL 10e subwoofer

Also I have been gradually collecting better quality vinyl, such as the BPO original source series. What would be the best thing to upgrade next?

saintsaens_op61

Speakers, and quality stands.  From your question and screen name, I take it you are a classical music lover. Klipsch speakers sound signature is not what I prefer for classical music. If I were in your position I would search out FBM, USAM, and here for a pair of used ADS L1290/2, L730, L780/2, or L880/2.  Make sure they have original drivers and .75” tweeters. All these models have ample midbass power and smooth extended highs.  Great clarity with no glare.  These are not dull New England AR type speakers…they are European inspired and were built to last.  The crossovers used mostly film caps and air core inductors. Rubber surrounds. Soft fabric domes with “sticky” damping compound. 
If any restoration is needed, Richard So does it best. 

AT about $1K, I would give a hard look at the Paradigm Premiere 200b, which often go on sale at around a bit over $800.  I have a pair driven by a Rega Brio in my second (bedroom) system, and they sound wonderful; my soul source for this system is streaming.  Excellent imaging for this price range, with a good balance across the frequency spectrum, although your sub will add some needed punch in the lower end.  I am quite pleased with them.  Worth a look and listen if you can, and they are manufactured in Canada.

 

@saintsaens_op61 IMO the best recommendation depends on your endpoint.  If you are looking to continually upgrade your system to a significantly higher level, then a major step-up in your speakers makes a lot of sense.  Just be aware that your source will really limit the benefits of the new speakers until you upgrade.  However, if you are looking for the largest immediate benefit to enjoy for a period of time I would do the phono pre and cartridge first.

Best of luck...

a few thoughts

If the space is small, and you find the music to be INVOLVING, I would not change anything. You might try plugging the rear ports, re-adjusting the sub, and see if you find differences in imaging you prefer.

You could search for a different separate Phono Stage as suggested, but always get return option as I have returned several highly thought of mid-priced SS phono stages until choosing the two tube MM Phono stages I enjoy (McIntosh mx110z and Luxman SQ-N150 MM/MC). I use a SUT to listen to LOMC via my mx110z's MM Phono.

IF you get a larger listening space, keep this as a second system and start over, 1st with large 3 way speakers, try to find efficient ones that you like, which lowers the power needs, which allows you to try tube amplification.

..............................

I assume you mean a factory provided AT95 cartridge body upgraded with a Shibata Stylus which is a very good choice for that TT, I would use that or the ML Microline version.

changing cartridges can be complicated, because:

which AT-LP120 do you have? Early 120 models allow arm HEIGHT adjustment, later models ... 120X .. (with X in the model number) have fixed arm height, thus you need to be careful and keep the cartridge height very similar.

If you have used or buy used LP's, they will sound much better if you thoroughly clean them and play with your Shibata or a Microline stylus shape. 

I disagree with the suggestions of cartridges with Elliptical stylus.

I don't know what your listening room/environment is, but you might want to look into that, as the room generally has more effect on sound than any component. For instance, if it's all hard, reflective surfaces and the sound is bouncing around all over (and I know people who have it like that), you can spend all you want and nothing is going to sound very good.