The L10320 is only rated at 15amps.
Any hospital grade 20 amp power strip will work but I’d look at Cullen Cable for well made reasonably priced power distribution
Please keep me out of the Rabbit Hole - Power Strips
I am finishing a new piece of furniture to contain all of my audio gear. I need a total of 10 electrical outlets. I can not spend much on the power strip at this time but I want to make sure that I do no harm. I have heard that cheaping out on things like power conditioning, surge protection, etc... can result in treatments that can cause other issues. When I renovated the house I did install a dedicated 20 amp circuit for this main outlet. My gear is perfectly quiet. Thoughts or Suggestions welcome.
My Gear;
Aragon 4004 mkII Amp
Aragon 24k Preamp
Aragon 10T2 Tuner
Linn LP 12
Linn Linto Phono Preamp
Eversolo A6
SMSL PL200T CD Transport
Topping D70 Pro Octo DAC
- ...
- 37 posts total
Seasons Greetings to All🎄! I’ve been very pleased with two power strips/line conditioners for my rigs. They are; Furman Elite-15i (13 outlets)and the Audioquest Powerquest 303-(13 outlets). They are both transparent (no hum-noise) and they won’t break the bank at less than $600. There are much more expensive units available but IMO these two units perform as well. Enjoy the music. O |
I also use the Wiremold power strip plugged into an Audience aR1p (original model) so I have power conditioning/surge protection for my whole system. They pop up used occasionally for around $400 and may be a good option as a stopgap if nothing else until you’re ready to shell out more for a better unit so at least you’ll have some peace of mind in the meantime. Just an idea FWIW. |
10 outlets, 20 amp capability, current protection, some noise reduction, Shunyata quality, and less than $100 per outlet. Here is my suggestion: https://sunnyaudiovideo.com/products/shunyata-research-venom-ps10 |
- 37 posts total