OCC and Litz wires - Furutech Alfa series, Neotech, Cardas

Does anyone tried Furutech Alpha 36 or S25 bulk wire. Please share experience.

Do you recommend one of these for rewire of speaker woofer section - aim Is to obtain tight and fast bass.

I use the Alpha 36 wire.

I purchased a 1m length from one of the distributors here in the States & then from China for 80% less & there is NO difference. I was using Monoprice 12/2 originally because of my longest run was 40'. When I connected the Alpha (bare wire) & compared the two, it was a winner by a mile. The clarity & authority the wire brought to my system was worth the trouble of snaking the wire to that channel (left). The right channel was a breeze, just through a wall.

I can't emphasize enough to the community from the day of install, what this wire did. Posted here on AG somewhere. If you're going to use banana plugs, I have had positive experience with Viborg copper plugs.

I ordered some Alpha 36 from Chris at VH Audio and it arrives today. I have some ETI Research banana and spade connectors I’ll be using. My current sc’s are some knock off Nordost cables that have served me well but I believe the Furutech wire will be a little cleaner sounding. We’ll see. I’ll chime back in once I have them up and running. 

I use Alpha  36 speaker cable and it is excellent. A word of warning, however. When new it sounds a little rough, strident and harsh. It takes a week or so of constant use before it starts to smooth out. So let it run in thoroughly before assessing it critically.

@rossb  Thanks for the heads up. I’ve heard it can take a bit of a break in but that doesn’t sound too bad if I’m able play a signal 24/7. Looking forward to seeing how the Alpha 36 performs.