Dear @soix : I know Steve from the earlier 90's when I bougth the tip toes and through the years I listen his electronics.
The Steve electronics today not yet has the Boulder or Dartzeel status. However the Levinson 20's has it after the change of those electrolitic caps in the power supply that any one of us can change with out solder/unsolder any thing due that those caps are screwed and only need to take out the topand bottom plates to do it and the Vishay caps we can get from MOUSER Electronics for around 400.00 the 4 caps.
The 20'sare the State of the Art design coming from the legendary John Curl designer.Is a100 w.of pure class A at 8 ohms and puts 800 watts at 1 ohm and can goes even to 0.5 ohm.and in that link you can pay lower than 5K for the pair monoblocks.
It has severaladvantages a one way important for the OP because using the 20's he does not needs an external HP crossover and additional cables or the sub's HP electronics due that the amps are coupled by a cap. So we only have to change at the input circuit board the Wima 2.2uf input cap for another Wima with way lower value to have that 80hz HP filter.
R.

