Good MM/MC coil cartridge for $100?


Looking for recommendations for a great sounding and bargain cartridge for around $100.  I dont care if it is MM or MC.   I have a decent phono stage (Parasound JC3+) and need another cart urgently.  Im not looking to spend too much at this time.  Thanks in advance.  

audioman2015

another AT150Sa, $325, make offer, seller says less than 10 hrs

wider channel separation than current designs

tracks lighter at 1.4g than current designs typically 2.0g

https://www.ebay.com/itm/205724725507?mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338381866&toolid=10001&customid=7ac97cd8-aec5-11f0-83ef-366165326233

Audio-Technica AT150SA cartridge specifications
- Type: Moving Magnet VM Dual Magnet Stereo
- Frequency response: 10 ~ 25,000 Hz
- Output voltage: 4.0 mV (1kHz, 5 cm/sec.)
- Channel separation: 30 dB (1kHz)
- Output balance: 1.0 dB (1kHz)
- Tracking force: 1.0 ~ 1.8 g (1.4 g standard)
- Coil impedance: 3.2 kΩ (1kHz)
- DC resistance: 800 Ω
- Rec. load impedance: 47 kΩ
- Coil inductance: 490 mH (1kHz)
- Static compliance: 40 × 10-6 cm/dyne
- Dynamic compliance: 10 × 10-6 cm/dyne (100Hz)
- Stylus: Nude Shibata
- Cantilever: Aluminum, taper pipe
- Vertical tracking angle: 23 °
- Dimensions: 17.3(H) × 17.0(W) × 28.2(D) mm
- Weight: 8.0 g

 

@elliottbnewcombjr  Did you read the post?

"Looking for recommendations for a great sounding and bargain cartridge for around $100."

 

yogiboy

Yes, and you know that I was active in that $100. category earlier in the discussion.

I always imagine others that follow discussions, and that AT150Sa, new open box or less than 10 hours, is a terrific cartridge for a very good price.

And, you never know when an  OP will exceed his budget, having learned this and that recently.

over budget, but under $300. 

AT125LC Cartridge Body $59. free shipping, in usa thus no tarriff

$229. gets new MicroLine on Boron

https://www.audio-technica.com/en-us/cartridges/styli-accessories/a-t-moving-magnet-styli/at-vmn45xml

There you have current production Microline on Boron, tracking at ?  for around $300. Original stylus tracked at nominal 1.4g, new boron, ____?

I’d like to hear it.

AT just revised the price of a new AT33PTG/II (now AT33xMLB) to $899. usd

https://www.audio-technica.com/en-us/cartridges/line-series/at33x-series

Here’s an idea, very lightly used AT33ML MC, $350 plus ship plus 15% tarriff

printed test results indicate it tracked at 1.25g; microline on tapered beryllium

https://reverb.com/item/89303342-audio-technica-at33ml-occ-moving-coil-cartridge-w-box-in-excellent-condition?utm_source=aw&utm_medium=affiliate&utm_campaign=https%3A%2F%2Fwww.hifishark.com&sv1=affiliate&sv_campaign_id=536903&awc=67144_1761584584_08f2d0cf749d616e25224a050e84ef66

like the AT160ML MM I bought, the headshell is both azimuth adjustable and overhang adjustable, concealed mount from below.