DIY Speaker Kits, a good idea?

I have seen the measured data for other Phenolic, produced using Paper - Cotton, and D/D Properties were poor in comparison to Densified Wood.

I do recall Compressed Phenolics in general share smillar m/3 weights.

I've suspected that the dignified veneer material is the substance that assists with creating attractive intrinsic to the material D/D Properties. 

Yes the densified woods Permali, Jabroc, Panzerholz are very similar. I have used them all including Festholz. They machine very well but Festholz makes such beautiful parts.

Dial in your feed speed and approach at the correct rpm and you will not have to sand or debur your profile/edges cut when finished. 

This is true whether you have 3mm Pz or 100mm on the table. 

Additionally, Phenolic Plywood Board can be found at approx'900Kg /m3. 

I own a board of this material type. 

These and similar produced boards are not delignified or produced submerged in a high heat Phenolic within a Vacuum Chamber. 

Again other Treatments being used that separated a Resin Impregnated Densified Wood Board from other Board Types. 

@bdp24 

"@nogaps: I myself almost bought the GR Research Super V to build. Before that could happen I was introduced to the Eminent Technology LFT-8b, an open baffle/dipole planar-magnetic hybrid loudspeaker (p-m for 180Hz and up, an 8" dynamic woofer in a sealed enclosure for 180Hz down). I’ll provide a link to the review of the LFT-8b by Steve Guttenberg below."

DANG YOU!

I've been listening to a pair of LFT-8b's for a couple hours now. I picked them up this morning.  On a lark, after you mentioned them, I did a quick a search and I'll be darned if a pair of 2017 vintage LFT-8b's weren't for sale in my hometown, just 45 minutes from me.  Price (asking) was very reasonable. He had already sold off his power so I couldn't hear them, but..I took a flyer based on your comments and lots of research I did afterwards.  That's what happens when I have time on my hands.  Humping the Super V assemblies on and off the floor to the bench a few too many times (while building other parts) resulted in a rather sore back for a few days.  So, while resting,  I did some research and one thing lead to another. 

Anyway, I'm still finishing the Super Vs, but in the mean time I'm digging the LFTs, a lot. They have sand-filled Sound Anchor stands too.  I have been listening to a pair of Snell Type As for a number of years. They actually sound surprisingly close to the LFTs in a number of ways. Though the LFTs take things a few steps farther. Very nice speakers.  I'm driving them with a McCormack DNA-1, tube pre, Titan ACI sub, and a streamer. For the cost..these speakers are one of the best deals on the planet. They're lovely. Thx! 

I'll be darned if a pair of 2017 vintage LFT-8b's weren't for sale in my hometown, just 45 minutes

It’s a sign

I'm digging the LFTs, a lot

Congratulations