Garrard 301 - Project

Bamboo Board with three tiers as the minimum and compressed on both planes, is a improved Board for intrinsic Damping/Dissipation Properties over most of the usual board types seen used for Plinth construction.

A 401 listened to, mounted on a Compressed Bamboo Board Plinth, is my most impressed listen I can recollect. 

Compressed Bamboo Board as referred to above does not cost too much. As a ,material it can be further enhanced for the attractive intrinsic properties, by applying thinned oils for it to absorb. I recollect seeing Shellac referred to as well as a Treatment to improve the properties, all good on my camp, as aesthetics are also being dealt with as well.

“What specifically do you not like about the DAS plinth? 
@ketchup

The finish and build quality leaves lot to be desired, certainly not worth the asking price. Others may disagree with my assessment and that’s ok. The plinth is on the lighter side and lacks appropriate mass needed to reject the excess energies produced by the motor and the platter bearing. You probably know this, a poorly made plinth will store and then amplify those energies with such efficiency that they encroach upon the music. I may not have the worst made plinth but it is certainly not what I had hoped for. 

The plinth appears to be made from constrained plywood and layered with a polished veneer. The bottom plate may very well be MDF layer for all I know. It took lot of experimenting with different footers to drain the negative energies away from plinth. It’s working well for now, however I wouldn’t hesitate to replace it when I cross path with something wildly superior; both in terms of build and aesthetics.

To have the most attractive aesthetic does add cost, especially if a professional Cabinet Maker Service is to supply fascia materials and carry out the finishing. Spray Paint Coating as a Fascia Finishing can be much more cost effective.

I am today more Wed to a aesthetic that has Honesty, the structure is not masked.

Mass Plinth and Idler Drives are from an era, when not too much was known about materials that are with an intrinsic property for Damping/Dissipation. 

There are extra options today for selecting a Plinths function. Where Mass is a Sink to absorb motor energy, reducing energies transferred through the Platter to the Stylus. Damping/Dissipation, where energies are canned through the material and substantially reduced in their impact on other local materials. 

There is plenty to be read on a forum like Lenco Heaven, to produce a basic idea for how each in use are perceived. 

My recollections are those who moved on from a Mass Plinth have not returned to the structure. Damping/Dissipation has its attractions.

I am also in the prefer Damp/Diss Camp. 

I have been enjoying analog bliss for past month or so. There is something very endearing about Garrard 301. Is it the timeless classic design or the toe tapping musical engagement…maybe little bit of both. 301 is a keeper!

I believe it’s time to further explore and maximize my investment. So, I ordered a heavier/thicker aluminum platter (topped with gun metal matt) and brass oil bearing to try it out. And more importantly, a custom plinth with dual arm boards. Opted for much sought after Hawaiian Koa in Satin finish with Brass arm-boards. The plinth weighs about 85lbs and arguably his best work off late. I can’t wait to experience it in my Man Cave…expected delivery around April 2025.

Cheers!

@mdalton 

SUT will be here after Capitol Audio for further exploration :-) 

@lalitk 

who’s doing your plinth?  Re SUT, is that the Etsuro?  And I’ll be at CAF - let me know if you’re coming.