Comparing Aurender N20 vs eversolo dmp A8


 I replaced eversolo dmp A8 with aurender N20 for digital streaming over qobuz. I compared them playing through native apps. Both feed into Holo may nos Dac over a USB curious cable. Ethernet cable connected over etherregen. Stock power cables feeding from a dedicated 20 amp circuit. Signal going through Luxman amp, 805D4. Luxman is doing pre-amp volume control. Both streamers are broken in.

 

Result - I am shocked to see that 1/6th price, eversolo is actually sounding better overall. N20 takes control with vocals, however the body of music/instruments is leaner. Not sure why I am seeing this disconnect between powerful vocals and lean acoustics. 

 

I got n20 used, and hence my assumption on it being broken in. Not sure if I am missing something here.. need help from fellow audiogoners..

saurabhgarg

IME everything in a digital source chain right up to the DAC is important, cables too. Also the differences between an N20 and A8 will become more appreciable the more high-end all the rest of the system components are.

That being said I think for most folks in most systems an A8 is all that is needed, a great product at an even better price.

I have a Lumin P1/L2 combo and the fiber optic connection has been a big sonic upgrade, so back to cabling, major sonic upgrades can be had without buying new components.

The DMP-A8 truly is amazing for the money. I preferred it's analog outputs to the Octo 8 Stereo DAC (Stereophile Class A) but I prefer the PS Audio Perfect Wave Direct Stream to either. It just sounds more dynamic and real. I use the I2S out from the A8 to the DAC.

I already stream from Roon through the DMP-A8 and it works just fine. I guess maybe what you get when it becomes "Roon Ready" is album art and track info on the front screen. Idk.

The only streamer I would possibly trade the A8 for would be the HifiRose RS130.

@saurabhgarg 

@lalitk is a great resource of all things audio, especially cabling. @blisshifi is another great resource.  My profile has my setup for power and AES between Holo May DAC KTE and the N20.  I preferred AES over USB.  I like my results, but I don’t have the expertise of those mentioned above.  I’m currently on battery through Shunyata conditioner and cables plus a bit of help from Synergistic Research.  I’ve spent much more on power than my streamer and DAC combined.

@vonhelmholtz 

Thanks for the kind words. Clean power (along with room acoustics) should be foremost priority for assembling a good sounding system. Once you have addressed the power and room acoustics, rest of the system is pretty much a moving target…you can gradually add/upgrade rest of the components. 

@lalitk is a great resource of all things audio, especially cabling.
 

I second that! His advice is based on actual experience and a ton of research.