Audioquest solid core pc usually have good bass.
Power cords known to produce good bass
All the cable naysayers and deniers please step aside. We have heard your opinions more than enough already. Thank you.
Tell me if this train of thought is off base or not. I am observing that power cords made with a high strand count of fine gauge high purity wire can be very resolving, very refined sounding and very smooth sounding but, they do not provide good bass. Usually true? Yes or No?
Here's a couple of examples of power cord wire that I find fit the above description. Furutech FP-TCS21 and FP-SO22N, Acrolink 6NP4030 and 7NP4030 II. These are cables that are or were available in bulk for DIY application. I have pretty much done all the DIY cables that can be made using the ready made bulk wire that is on the market.
Across three systems, I do have a lot of Transparent Audio power cords from the mm2 generation and the Gen 5 generation. All of them are re-terminated by me with Oyaide 004 cord ends.
I'm now looking for opinions about which other manufactured power cords are thought to have good bass. In particular I want to try something to go between the wall receptacles and power conditioners. At present I have two of the Acrolink 7NP40430 II cords in that position. High resolution but bass could be better.
Unfortunately, due to my hearing condition that is called hyperacusis, I'm extremely sensitive to brightness, harshness, shrillness, etc. etc., which means it is no dice on silver wire and most plated cord ends. Other than the Oyaide 004 ends, all of my cord ends and receptacles are un-plated copper.
So, any suggestions will be appreciated.
- ...
- 57 posts total
@jumia Due to my inadequate explanation, you have misunderstood which cables I'm wanting to improve. The cables that are the issue are the ones made with the Acrolink 7NP4030 II wire. I am a big fan of Transparent Audio cables largely because of the way that they tamp down the high frequency problems that are very exaggerated to my ear, again due to my hyperacusis. All of my IC's and speaker cable are Transparent. I don't use all Transparent power cords because I find that some components just sound better to me with other cords. I have three mm2 PI -8 power isolators and one mm2 Reference power isolator in the main system. Re: wall receptacles, of course everything matters, I have both some Maestro and some Oyaide R-0 (un-plated copper) receptacles (on dedicated power lines). I grant you that the Maestro recepts. are not all copper but they work well for some parts of the system. Re: re-terminating the Transparent power cords. I simply dislike the sound of brass cord ends. Let's face it, Transparent uses el cheapo basic brass cord ends. The gold plated ends on the newer generations are not to my liking either and I figure that they are on the inexpensive side also. For the most part, I prefer un-plated receptacles and cord ends except that I do prefer the Oyaide 004 ends on the Transparent cords. The 004 ends are made with beryllium copper instead of the phosphor bronze that their other ends are made from. Most of the Furutech ends are phosphor bronze also. I hear a difference and prefer all copper ends. My concerns about bass are about quality not quantity. |
| Post removed |
Did you replace the ends yourself? Is it a big deal to do this? Ashame transparent doesn’t use the best quality connectors which kind of surprises me. Not sure the outlets within the transparent power isolator I have are of really good quality either but I think the unit itself reduces noise. The isolator weighs a ton as if it were filled with lead. |
- 57 posts total