Where should I go from here with my digital front end?

So Wednesday my Amazon delivery arrived. I unpacked the two FMCs, fiber cable, LPS with its two extension cords. Connections were made easily except that the extension cords that amazon bundles with the LPS did not fit the input jacks in the FMC. Bummer. Luckily, the LPS provides one and I happen to have a spare.

I powered up the system and and queued up my list a test songs that I'm very familiar with but due to the amount of times I played them no longer enjoy. I checked my DAC and its white LED  light is lit indicating it is receiving signal from the Lumin. Stting up the fiber was a success. Very easy to do BTW.

Before i pressed play, I did notice an eerie feeling as if something was not right. It was a silence that i could "feel" if that makes any sense.

Anyway, I pressed play on the Stone's " Cant you hear me knocking" and that guitar rift blasts out of my right speaker. Audio Physic speakers have a reputation of " disappearing" but this was different.

This was special . I listen thru the whole song, Enjoying it as if I was hearing it for the 1st time. In a way that was true. Hate to use this cliche but I was hearing deeper into the mix. Hearing things I've never noticed before. Loving it. Track after track of songs that I enjoyed at one time but now were reborn.

I Did not experience any glare or glassy sound that Paulie Walnuts experienced :^)The bass did thin out a bit but in a good way for me.   

If you enjoy detail, look into fiber. I can understand some may find it thin sounding.

No bloom or warmth here.

Honeymoon period? Maybe. I have until January 31st to return

Lowered noise floor is likely the first thing one will notice with insertion of fiber, this will generally be an objective  finding. If one is comparing to an optimal ethernet setup it may be difficult to discern a difference here. With my present streaming setup I can have both optimzed fiber and ethernet chain. At present I'm most enjoying optimized ethernet from ISP through streamer ethernet output to Sonore OpticalModule, so fiber from the module to dedicated streamer(OpticalRendu). Full ethernet chain using custom streamer minus the Sonore fiber components not quite up to the fiber setup. I have one further ethernet upgrade available to me that could change the equation.

At this point, based on my own experience and many others, I'd suggest both routes are capable of delivering a top flight streaming experience. One should evaluate comparative reviews of these two modes with a critical eye. One will find vast majority of these comparisons  between optimized and non-optimized modes of bit transmission.

@emil LOL

Glad to hear it made a difference. The drop in the noise floor is in line with what I experienced in my system as well. 
Now you can add a better Ethernet cable like that Purist I mentioned or another good cable of your choice and take it to the next level. The Purist May rebalance the bass to a degree. It’s one of its strengths. 

sns

Lowered noise floor is likely the first thing one will notice with insertion of fiber, this will generally be an objective  finding.

While many cite a lower noise floor with fiber, they usually do so by saying the noise isn't noticeable until it's gone. So it's interesting you've found a way to establish that objectively. Did you do that through measurement, @sns?

So I have a Lumin d1 and was told that it has galvanic isolation so a Eno filter is not needed. Any comments?