Amp Internal Wire

My guess is those internal amp wires are too short to make a difference and you might do more harm than good removing them and (poor) hand soldering new ones.

But if you like to go for it ... don’t forget the wires inside your speakers. Depending upon their size there may be more length there and you may be amazed, after you just got your $5000 speaker cables, what standard wires inside the cabinets you have attached them to.

I agree with those who are saying enough is enough. On my speaker designs, I use a better quality wire inside of them than most Major manufacturers do, but that is even overkill. A couple of years back Belden did a study and claimed that their CAT5  wire was quite sufficient for Audiophile grade connections up to 10 feet. and you are concerned over 4 inches or less?!?!

Now I might not agree with Belden, but that is what you will find inside speakers for less than $5000 in many cases. ANy High-End Company worth its salt has done its homework and knows that we are talking about things here that are so far beyond being measurable it is ridiculous.

My custom built 300B SET monoblocks has OCC silver internal wire and same for output transformers, I did replace a couple internal wires with Duelund dca for a bit more warmth. My speakers wired with combo Furutech and Duelund dca, Jantzen solid core and litz inductors. I've been experimenting with wire for years, with many components and cables, to claim it doesn't result in changes in sound simply means you've never attempted it.

Time is so precious, I would rather spend it on something else. I can solder well, just don’t really enjoy it. To each his own, enjoy the time you’re given.

Would it not make more logic to just buy a new amp?

Then if you are going to replace the wire should you not replace all other components and the power supply. What about replace all the connection points.? Again just buy a new amp! Your logic is to replace a perceived weak link and will just make another link the weak link and on and on?