Has anyone bought the Psvane Acme 300B Vacuum Tube?


These are on my radar but I really know little of them. I had contact once with a fella that re-tubed his VAC Renaissance 70/70 amp with them and said they made a big difference in a good way. It would take about $4K to re-tube my amp with these. I am not in a hurry, just doing research. I can have VAC re-tube it for less than half of this. I think tubes will last a very long time in my amp, especially after I get the MK III upgrade on this amp when I take it to VAC this October. I can also get Gold Lion PX300B tubes for half of this, any one use those? I've had this amp a long time, I plan on keeping it until the grave so I want to do this right their first time even if I have to be patient and wait to afford a re tube. I am retired so disposable income is vastly reduced. I am just thankful i have so many fine audio pieces to enjoy now that I bought many years ago when I could.

128x128fthompson251

@blisshifi , So I went and inserted the EML 300B XLS back into my amp, just to check the sound after putting them away for 8 mos. I have to say, you are correct about the brightness, even slight edginess on top. Interesting that this is because of being under-driven at 60mA in my amp. I also noticed how much more robust they are through the whole spectrum, especially the bass and lower midrange. I think this bottom robustness is what I was recalling as romantic. The Taks have a gentleness that is nonetheless quite resolving. And because they are more electrically "correct" in my circuit, they have a rightness of sound that gives greater depth and precision to the presentation. At least that’s my interpretation, and it’s what I was hearing as "more resolving." I can also understand how this aspect could be heard as more romantic, as you say. Anyway, just wanted to clear this up. I appreciate your knowledge and insight.

@wrm57 Thanks for your report back on the EML - I would agree with your assessment and understand what you mean by the Taks being more resolving. Sometimes there is just more there in the midrange, even if it means being more relaxed at the frequency extremes!

Good comments! These premium tier 300bs are all excellent In my experience. Yet, each will match better with some amplifiers/circuits than others. Very individualistic process.

Charles

Please correct me if I have misunderstood what is being communicated in some of the above posts regarding 'resolution?'

In particular, I do not get how a specific tube can be "more resolving" (in the midrange... I presume) yet be simultaneously rolled off above and below (in the frequency range); in other words less resolved above and below.

 

I would agree with your assessment and understand what you mean by the Taks being more resolving. Sometimes there is just more there in the midrange, even if it means being more relaxed at the frequency extremes!

 

Don't buy EML tubes. Their 5 years warranty is crap.

I bought a pair, one failed only with 10 hs or so of use and they blame my amp as they said it had lower heater voltage than "recommended" by them. 

Well, my amp had about 7% lower than the 5v ideal heater voltage and they cover up to 5% of difference. 

I consulted other experts on the field and no tube can be broken by low heater voltage. I have Shuguangs and Golden Lion 300B working fine for years that back up these experts opinion.

Summarizing, don't buy EML and if you are an EML fan, I can sell you a brand new EML XLS 300B single tube, I cannot use alone, with a good discount.