Grounding cable gauge size

afg101, Thank you for that information.

I have been experimenting now quite a bit with this grounding method. It is better to separate digital from analog into 2 different grounding boxes. Luckily, I built several DIY boxes that IMHO are better than the Entreq,

What I am hearing is a deeper soundstage. Music that I am way too familiar with such as example: CCR "Green River" perhaps not the best recording but one of my favorite tunes, I can clearly hear brother Tom strumming along in the top left of center quadrant. Previously it was buried in the mix. Also listening to Linda sing "Blue Bayou" is really captivating.

ozzy

There doesn’t seem to be much interest in this thread. Too bad though because it really is the great unknown as to the level of improvement in sound quality it can provide. I mean what I am hearing is a deeper, wider, clearer- soundstage. All positives, no downside.

It’s sort of like star grounding the signal cabling but with a base sink that dissipates any noise (present or unheard buried deep) that may be present in the sound quality.

ozzy

Too bad though because it really is the great unknown as to the level of improvement in sound quality it can provide.

Grounding is really important so naturally it can affect sound quality quite a lot. But I was not kidding that if your equipment employs a proper grounding scheme, an external 'grounding box' will not offer any benefit whatsoever.

Atmasphere,

Thank you and I respect your opinion, but I consider it just your opinion and not actual experience.

ozzy

Hi Ozzie,

I’ve been following both this thread and your post on WBF and from what I’ve understood from Peter is he stated multiple gauge silver to achieve a 15 g and that’s what I have been playing with along with different gauges to come to 15 g along with silver binding post and silver spades, next will be silver rca,s,

I think the key is to use multiple small g wire to achieve the 15 g due to its small signal .

I agree with you on separating digital and analog , each component has its own box I even have a separate box for chassis ground.