1. Home
  2. digital
  3. 173264-168368

Modding/tweaking my system

Hi all

I thought I would start this thread almost like a diary.

After living with my system for 12 years, purchased 2nd hand, i find myself wanting to see if i can improve on the sound.

I tried modding a Marantz cd67 player years ago with some success then went too far and wrecked it.

The system is 

Rotel RCD02 cd

Cambridge Audio Dacmagic

RC03pre amp

2 RB03 power amps running as mono blocks

PBC FB1

The first thing I wanted to do was tame the overly bright high end by modding the PMCs to + after years of searching I finally found the crossover layout bought the parts and set about the mods.

1st impressions are the highs are tamed however I have 1 speaker that "sounds" louder than the other, more on that later.

I bought the Dacmagic el-cheapo without the box or instructions. I recently downloaded the instructions and realised the Spdif requires the use of a 75ohm digital cable, I've been using a standard RCA all these years.

The room, HiFi and speaker placement are far from optimal but it is was it is and cannot be changed.

I noted I can feel the CD chassis vibrating with music at reasonable levels so that needs a change.

The overall voicing of the system I would describe as slightly forward with a muddy mid range.

It's the highs and mids I'm looking to resolve.

 

notdeadyet
notdeadyet OP
23 posts
 

Okay

So opened up the hood and knock, knock 

Plenty of resonant surface to pay with.

Installed approx 2/3 of the cover with dynamat extreme

Next up a couple of pieces on the crystal itself, cleaned the lens and back together.

Listening test

I didn't expect much change here after all its just damping.

I'm shocked actually.

Whilst the sound is cleaner more mid focussed its lost a lot of bass! I know right how is that possible?

Bass extension is still there just lacks weight and overall sounds bright, slightly thin and "cold" but  the level of detail is amazing

I even tried a goto bass work out, Goldfrapp Supernature yup its gone!

Pop goes the hood again targeting the crystal as I suspect that can be the only suspect. I admit the detail currently displayed may go but thats a trade off I'll have to live with.

Life is about compromise 

 

fuzztone's avatar
fuzztone
5,651 posts
 

Okay

jerryg123's avatar
jerryg123
3,429 posts
 

@fuzztone this guy must be related to mozartfan.

notdeadyet OP
23 posts
 

So the damping material on the crystal removed.

The detail is now lost but the bass (to some extent) is now back.

The player looks nicely set up inside albeit pretty basic.

Nice large rubtcons on the power supply think i'll leave them alone.

The effect of damping the crystal leads me to believe a clock may possibly yield greatest results followed by op-amps and decoupling caps.

The aim is to keep the bass performance whilst opening up the detail especially through the mid-range. Tonight has shown me what the player can yield!

From this point on parting with £ may be in order.

As Floyd says

Tear down the wall

oldhvymec
5,101 posts
 

Wow.

More to discover