oldhvymec

Responses from oldhvymec

Cary Audio CAD-280SA V12R
One thing I forgot to mention... This amp and neo 8 planars, no running out of gas, I've yet to crank it, BUT, at 49% volume, on the led, the Rabbit, the dog, and the hummingbirds start looking for shelter. No power issues, no distortion issues (t... 
POST DELETION
Hello Mr George "(shilling)"  Paid? I guess. I wish someone would pay me? LOL"numerous id’s" mmmmm ok, heck I can't remember my password, much less another name..Geezzz"That’s not to bad so long as they are getting solid EE schooling."You mean the... 
Cary Audio CAD-280SA V12R
bradluke0154 posts03-31-2020 6:56pmIts 35 ma per tube . 2 tubes per side = 70 ma. 4 tubes per side =140ma . 6 tubes per side = 210 ma . The manual is wrong , if you go to 275 ma with 6 tubes per side you will pop the fuse.No fuse pops so far...B... 
sodium / tungsten / magnesium, aluminum, wire?
I have some crazy stuff coming.. galadum (sp) scsilver scnickel/silver scbrass scbronze sccopper/silver clad mscopper/silver/gold 80/16/4 scsilicone tubeI already hadtungsten sclead sccopper mssilver mscopper/nickel msstainless steel 440 scflexo n... 
What Class D amps will drive a 2 ohm load
Whatever, you stick with this  https://www.ebay.com/itm/Behringer-NX3000-3000-Watt-Class-D-Power-Amplifier-AUTHORIZED-DEALER-NX-3000/283772476295?epid=9018533458&hash=item4212285b87:g:j4sAAOSwEVlb7xpS What's wrong with Behringer? I use a pa... 
POST DELETION
 This is my approach here, and I have set a rule for myself -- no politics. (And I'm a very passionate political person. But not here.) AND certainly the better person for it...I can learn, one of the few thing I'm pretty good at..Old dog, new ... 
POST DELETION
You know a BBS is a good answer for this.. I had one for 10-12 years, a ways back, 80-90s.. Nothing ever got deleted. Uploads were checked for viruses and legality, If there was an issue, it never got posted, or shown as downloadable. If it was le... 
POST DELETION
Well back to deleting post again. I've almost got it narrower down who's doing what.  Couple more months, I'll figure it out.. It's not auto delete it's a person or two..Either the moderators aren't paying attention again or in cahoots for sure, n... 
Class D is just Dandy!
Wow deleting post again.. Same bunch, now I see how the wind blows.See you laterRegards 
Cary Audio CAD-280SA V12R
It's just 210 div by 6, per "rail" as you noted.  If you are handy, pull lower cover, look and see if it has those four of the thin silver'ish Audio 1 coupling caps. I  guess I'm thick, so if I have two valves per rail then bios at 70ma and 4 ... 
What Class D amps will drive a 2 ohm load
Tell you what, you suggest an amp at 1000.00 USD New.  It has to have just half the specs of the hypex or ice modules. 1000.00 USD New?Class A, AB, anything that sound as good, stays cool, low cost  to run, quiet, and 1/2 the wpc, heck a 1/3, a 1/... 
Cary Audio CAD-280SA V12R
 As I recall. 35ma and 210ma per channel was about right, sounded good too. So is there a place to check for the 35ma (per valve?) or at the pin # whatever. I can see how to get the 210 per rail, but kinda lost me with the 35ma, Just a referen... 
What Class D amps will drive a 2 ohm load
Like I said so many times now, a "stable" amp into 2ohm load means it won’t oscillate blow up and take out speaker drivers, but it does not mean it can drive the loads we are talking about here. Ok 550 watts not oscillating, won't drive a speak... 
Cary Audio CAD-280SA V12R
Since you are interested in using the amp with planar, you might be interested to know that for me, the V 12 R ran out of juice with the Magnepan when played above 80-85 db. The amp worked well with the other speakers I had, though. You know, ne... 
Cary Audio CAD-280SA V12R
You have bias the tubes differently if you change the number in each channel , Cary was great help in directing me . Good luck . Do you remember HOW? Cary isn't answering the phone today, go figure.LOL shoulda' known..Regards