Where to install Superclock3, Transport or DAC?
FWIW Elberoth2 ..there are at least two modding companies installing the Super Clock 3 in the BelCanto. Empirical Audio and Reference AudioMods. Personally I would save the money and just get the jitter/signal reclocker and conditioning unit along with a 1.5 meter digital cable and be done with it. |
Aftermarket clocking makes the larger difference in the transport and it only makes sense because this where the information is being extracted from the disc and error correction and noise and jitter must be addressed or you will not have optimal performance in this scenario. Aftermarket clocks in general being installed into DAC's, (ie: Belcanto DAC2) make a definite improvement as well. Certain DAC's use clocks for upsampling features, hdcd, de-jitter and some other uses depending on design. An active clocking circuit is very dependant on the quality of power being fed to it and how it is addressed in connection to the circuit, and how it is designed, and some other things. My view is to keep everthing as short and simple as possible, lose any extra connections and noise, and most importantly, Enjoy The Music!!! Thanks! |
Thank you all for your suggestions. Reading some of the DAC2 reviews again (after 2 years), I realized that the DAC2 was supposed to be a very good jitter rejection unit, so now I wonder if an aftermarket clock would really make a difference anyway (either in my transport or DAC2). I saw that Reference Audio Mods makes mods (that includes a superclock3) for the DAC2, and there is a very positive review about this mod in their website, but I was wondering how much of the final result was due to the superclock specifically and not due to the other parts swap. Any other comment? Thanks! |
