Cable Goop Review George is going to freak!!

This thread has really gotten off topic but I did do some experiments with Noalox a number of  years ago.   We had a problem in an amplifier where the steel chassis ground connection was rusting after a year or two, causing a noise problem.   I found that using Noalox at the connection point eliminated the rust problem but also increased the rate of current change during the test.   That is, the current rose about 10x faster through the steel - Noalox - nickel connection than the bare steel to nickel connection.  That is significant indeed.   I never tested it on speaker connections though but it is a thought.

spatialking,
And your post is on topic?

ozzy

Hi, I have just applied NPS-1260 to all contacts on power cords, RCA cables, internal connectors of Amp and loudspeaker. I am missing fuses and digital cables.
I can clearly hear improved texture, clarity and separation of the music.
It is definitively worth it, and apparently, the sound will further improve.

Congrats!
I have found at about 5 days after application the dynamics improve, perhaps due to the lower noise floor.
Go for applying it to end cap fuses and digital signal conductor's.
Just keep your application to minimal, in other words don't slop it on, but control the amount applied.

ozzy

I know I got some of this product and tried it and it is okay.