Amp recommendation -- McIntosh, Luxman, Yamaha


My system now is a Benchmark DAC3L and AHB2 with standalone phono stage for Technics SL-1200GR.

I want to simplify my system and I think a solid integrated will do that (reduce to almost one box)
Interested to possibly use 2 pairs of speakers and A/B them.
Interested to drive a separate power amp (probably tubes) with the same unit.

I'm looking at the Yamaha AS-2200 and Luxman L-507uXII which pretty much fit all the requirements:
Both allow 2 pairs of speakers. MM and MC carts. Preamp out with ability to toggle speakers off. Nice meters.
The McIntosh MA-5300 is another option, it throws in a DAC but lacks MC capability and dual speakers.
Has anyone heard these and compared?

I've got a range of speakers, some vintage JBL L36, JBL 4412 and Klipsch Quartets.
I'm in the process of building Troels Graveson Faital 3WC and Ekta MK2 which will likely be my long term speakers. None are too difficult to drive.

Only interested in additional recommendations if they have similar set of capabilites as above and are in similar range (~$6K and under).
itsikhefez
you won't go wrong buying a modern luxman... you will certainly pay up for it, but most feel it is money well spent
In the future I'll connect a lower powered tube power amp and driveit from the pre-outs.

It seems a bit of a waste to me to get this nice an integrated and then just use it as a preamp. Is the plan to flip the integrated for a good preamp at this stage?
Good point, I should clarify ...

The integrated will be used as-is most of the time. The system is in a dedicated "media" room for stereo listening and occasional movie watching. I don’t care too much for HT so movies will go through this same 2ch setup.

I enjoy DIY audio and have built a few tube amps, some 300B SET, EL84 push-pull, an EL34 push-pull is in progress.
I’d like to be able to easily integrate one of these power amps into the system for casual listening.

The nice thing about using the pre-outs of the integrated for this is that all of the sources (DAC, tuner, turntable) will already be connected and the remote control and various preamp functionalities (volume control, source switiching, balance) can be used.

Given that the integrated has a speaker off switch, I could easily go between solid state (Speaker switch on A, tube amp off), and Tube amp (Speaker switch to off, tube amp on)

Luxman is higher build quality and almost as good resale value as Mac. 
The sound signature is quite different. You won't go wrong with either brand.  Rotel and aforementioned electronics are not on the same level. I have Mac and plan on getting a Luxman 590