I’m also worried about how much of the harmonics in the music is LOST by the amp?


Of course, I don’t want gross harmonic distortion, but don’t abuse or lose the precious harmonics in the virgin recording either. No way to measure that, though, right? Thats where the ears come in…
redwoodaudio
If the system has 20Hz to 20KHz bandwidth you're not losing any audible harmonics. So if it seems that you are, something else is afoot, and that something else is distortion. So yes.


For example a thinner, less 'fleshed out' sound might be because the amp has a coloration of brightness and harshness which is common with many solid state amps. This is caused by distortion- the ear assigns a tonality to all forms of distortion and the higher ordered harmonics get harshness and brightness.


Because the ear is sensing brightness, it will seem as if the sound is dry even though the bass is present. This is because the ear 'tilts' your perception depending on what spectrum is perceived as loudest.


When solid state amps exhibit this behavior its usually because they lack the feedback needed to clean up the distortion caused by the feedback itself, which is almost entirely higher ordered harmonics. This is literally why tube amps are still around after all these decades. They don't have enough feedback either, but they generate more 2nd and 3rd harmonic which masks the higher orders- and so sound smoother and often as a result more 'harmonically correct'. 
A 20Hz to 20KHz bandwidth system is an absolute necessity. Just because it provides a full bandwidth doesn't mean there the finer detail and harmonics are being lost, which I believe is the question.

The best approach is to treat your equipment in the same way as sensitive medical equipment.
This subject is basically fantasy football. I was never any good at it. I would always say okay you pick your team players, I pick my stadium, with $3B tax credits, waivers, lease buy-back. The real fantasy is thinking its anything to do with winning games.

With this one the real fantasy is thinking its losing harmonic information. There is some lost, mostly though it is ultra-sonic. Which we already know no one can understand how that matters. So? Get some supertweeters, hear for yourself!

Back to Fantasy Island. The real problem is like Ralph said, harmonics being added. Every component does this. Every single one. Speakers, cables, amps, DACs, interconnects, power cords, floors, racks, walls, on and on. They all vibrate like crazy.

I never really understood just how much this is the case until the last year, as one after another layer of added harmonic resonance was removed and my system became as a result clearer and more natural. The real problem in having a violin, or harmonica, or drum or whatever sound like what it is, it is not the missing harmonics but the ones all these components add.

So when I went to cones a lot of them were gone, but they were mostly shifted to a narrow band- ringing. This imparted a hardness to the sound that in some systems can be mistaken for detail. As things get better and better however it becomes more clear this is not right.

Springs remove the ringing but leave harmonic resonance. Added harmonics. Altered tone. Instruments that no longer sound as they should. Remove these, with just the right amount of damping, wow what a difference! Less harmonics, not more.

Same with speaker cables. Same with interconnects. Amps? Why would amps be any different?

In reality, I mean. In fantasy land anything goes. Fantasy or reality. The choice is yours.
Ones digital cable could be why some have negative comments about SS, and likely class D. I have owned quite a few AB SS amps, as well as class D (and a handful of tube amps & preamps. My current class D which I have owned for close to 2 years is the EVS1200 from Ric Schultz: Tweakaudio.com

Since I first got it I was using an optical cable. I wasn’t crazy about the sound and thought I needed to replace my Audio Alchemy DDP-1 + PS 5, but I don’t have that kind of $$$ sitting around, and so, I needed a plan B. About a month ago, I got the bug to try coax (FINALLY). Being budget minded, I bought 1.0m Pangea Premier SE ($49.95 from Audio Advisors) and started a thread. Someone recommended to get 1.5m, which I did, and though it was harmonically richer, I wasn’t sold on it.

I replaced the 1.5m Pangea Premier SE with the 1.5m Pangea XL, the presentation is much more intimate. I find my body grooving to the music: PRAT. Now, some 50 hours of play time later, I am blown away (especially for $150!). So far, every redbook CD I played I am much much closer to the actual recording: singers and instruments are extremely palpable and when recorded, bass, drums, and piano are very authoritative.

https://www.audioadvisor.com/prodinfo.asp?number=PGDCPXL&variation=1.5
I also like Pangea cables. I got the optical also a while back. I hear way more fidelity when hooking up using the coaxial input. I need to upgrade there next.