Thiel Owners

The conductor and all its surrounding and wrappings are placed in a clear tube which is then filled with micro bearing steel and sealed at each end except for the required length for proper termination to a terminal lug. The size of the bearing matters because you can over damp the cable if it is run externally ..I know I can hear that..but taking the speaker apart several times to listen and compare bearing size over again that is a real drag but I bet their is a difference there also. I learned much from the video and now I wish I could go back in time because he raised a whole lot of ??s in my brain.

Tom

In a speaker box all the wires +and- are separate from each other and run in tubes as are the wires that run from the amp to the speaker their paths never cross. Every polarity runs mono in a tube.Tom

I remember here awhile back that some of us messed with parallel feeds, like you are describing. Seems all agreed it sounded somehow "nicer" and "more alluring". Seems that at least 2" and preferably more separation is needed to minimize capacative coupling. Such a jungle!

Purist has been making albeit expensive liquid insulated cables that certainly have their admirers for some time now.

I forgot about those cables.
Liquid of some type would absorb or limit vibration transmission but probably not limit RFI reception  like the use of micro bearings. Tom