What tomearm ?

Your tonearm can be assembled and rewired for under $100 by technician

Do you know of a technician that does that ? Im asking because I have advance lung cancer and because of my condition I really cant go out to the streets looking for one but I could call him by phone and mail him the tonearm with platter .My wife could help me mail it . I live at Mesa , Arizona .

mcmvmx

Do you know of a technician that does that ?

Steve at VAS in NJ. He's an expert, reasonably priced and usually has fast turnaround times.

@rossb , Excuse me, all 9" Pro-Ject and Rega arms have a spindle to pivot spec of 222 mm. I even think the hole is the same size but I'm not sure of that. 
MCMVMX , look for a used Rega arm. They are around. If you took the Pro Ject arm apart you should be easily able to put a Rega arm on. 
Hang in there,

Mike

I screwed up!! The Pro Ject arm spec is 212 mm. So, you would have to move the arm 1 cm away from the spindle. That is not too far and the base may cover the hole. It will work but you will have to enlarge the hole a bit.