Audible wow on Well Tempered TT

Perhaps, time for a new motor?

Funny coincidence it may be, since I just now been playing two records (at least) I can hear what sounds like speed instability too. 

On my Ortofon M20 (MI type) I changed the FL super stylus insert to the E super. This one has a VERY high compliance of 40cu, double that of the FL super. 
So what seems to happen now, that slightly out of centre LPs are 'pulling' the stylus back and forth while negotiating the outer grooves, clearly visible as it happens. 
The effect is a listening perception of speed instablity, a kind of 'groove wobble' induced wow! 

So definately no arm-damping for this type of high compliance stylus / cantilever insert - and next no anti-scate force setting - if any!
As it also will act as a form of damping on the tonearm's lateral free movement. 

The more restricted the movement will translate into unwanted horizontal cantilever deflections, and my best guess, sounding like wow, and more noticeable with slow drawn out music passages.
Examples are opening passages of 'Giselle' Act I and II. 
One more would be 'On the Beach' by Chris Rea.
Both my LPs have slighly out of centre holes. 
Michélle 🇿🇦 

Justmetoo, You wrote, "slightly out of centre LPs are 'pulling' the stylus back and forth while negotiating the outer grooves, clearly visible as it happens."  I don't know why or how the shape of the stylus tip would make that phenomenon more or less apparent or more or less a cause of wow.  Maybe you are saying that the increased compliance of the new stylus is making the phenomenon more easy to visualize, but you've quoted vertical compliance; that may have nothing to do with horizontal compliance. Off center LPs are an incurable cause of wow no matter what, unless you are one of the few who own the Nakamichi turntable that provided correction for this problem.  We often lament that no other manufacturer ever adopted this adjustment.  And the Nak is rare (maybe because it came out during the eclipse of vinyl reproduction by digital, was expensive, and did not sell well) as a result.

@lewm 
Ehhhh,
OF COURSE! and very much meant, the stylus IS attached to the cantilever!!! 😏 

AND OF COURSE still nicely tracking, following the record groove also! 

The stylus AND cantilever! VISIBLY moves about, deflects visibly, laterally, from the cartridge body, via it's suspension, no doubt. 

This cantilever/stylus deflection, pretty much is in consort of the wow heard - and given due to the described 'tonearm' damping via anti-scate force setting and/or silicone etc. damping trough (this given the high 40cu compliance) 

Please don't expect me to write a Phd theses on this now, please! 😊 

Not THAT hard to understand now, I think. 

If the compliance is a lot less (than 40cu, ~ <= 18cu) - 'visibly' - the tonearm, cartridge en complete, moves just fine with the off-center displacement, with no *visible* defection. 

I hope this will make it a bit more clear, if needs be? 🤔 
Michélle 🇿🇦 

@lewm 

Oh, and one more thing, you are seriously suggesting an e.g. 40cu compliance will only apply vertically ?!? 🤔

Looking/feeling the Ortofon M20 E super or FL super (stylus+cantilever) inserts does not convince me of that take, at all - as it is pretty 'wobbly' left to right, too to bottom... compared to the e.g. ORTOFON CADENZAS BLACK of less than half that Compliance ~ 18cu.
Michélle 🇿🇦