oldhvymec,
17 awg, and high inductance --- not a great target for a cable, but they sure are purdy!
17 awg, and high inductance --- not a great target for a cable, but they sure are purdy!
recommendation for rca interconnect for deeper bass for dac to preamp
Hi,
I use a synergistic research galileo rca cable from my preamp to the phono but need another rca cable from preamp to digital.
the combination of my battery preamp and chord hugo 2 battery dac is incredibly transparent and great PRAT. I am thinking a rca interconnect between the two that is known for a strong bass (copper?) would be ideal. I wish I could use the galileo rca for that too but its a pain to keep switching it from phono to digital player and its too pricey to buy another one (especially since play 80 percent vinyl).
Any suggestion for a used rca IC for under 1K used?
thanks
Michael
I use a synergistic research galileo rca cable from my preamp to the phono but need another rca cable from preamp to digital.
the combination of my battery preamp and chord hugo 2 battery dac is incredibly transparent and great PRAT. I am thinking a rca interconnect between the two that is known for a strong bass (copper?) would be ideal. I wish I could use the galileo rca for that too but its a pain to keep switching it from phono to digital player and its too pricey to buy another one (especially since play 80 percent vinyl).
Any suggestion for a used rca IC for under 1K used?
thanks
Michael
- ...
- 34 posts total
audio2design986 posts02-05-2021 11:18amoldhvymec, 17 awg, and high inductance --- not a great target for a cable, but they sure are purdy! Report this <<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>> The oil/tube RCA A2D, what the heck does oil do? You're all about the science. Why does it change the wire sound? I drained one and took one out of the silicone cover, all 3 sound different, the oil though... It is really weird. The speaker IC The twisty copper conductor, was an AGon idea, "Use copper tape" is how that started.. 15 years ago and again three years ago. Then the twist shows up in China.. LOL I think they track AD on the down low... The money folks are willing to spend, why not? They are weird looking, that's for sure, No folding either. I didn't measure the bare cable or with ends.. I don't use it, now, BUT I have.. Great sonics, for round speakers, horns, domes, rings.. Planars/ribbons.. not so much. It's always copper that comes to the rescue, heavy copper. What are most of the voice coils wound with? Copper... I NEVER had a lack of bass, too much.. that's pretty common.. 280hz and up planars and ribbons for me.. Who know what they use. :-) Regards |
They are a TINY wire too. I have a 3 wire weave SC silver that was the best. It took a while for me to sort out some of these vendors.. MERCY BUT the weaves and ribbons.. I would be nuts not to try it.. LOL I just kept my mouth shut for the last 10 years... My German mechanic buddies are the ones that turned me on to them.. They buy a lot of cabling from china...like ALL of it... Environmentally PTFE is a nightmare to manufacture...Always outsourced... Vinyl is pretty nasty too.. Regards |
- 34 posts total