2. amps-preamps
  3. 163392-17107

AR LS17SE Volume Control

I picked up a used AR LS17SE preamp last fall.   In general I’m quite pleased with it.   It is my first exposure to the AR sound.  
What stands out to me is the limited volume control range.   When I was researching a preamp for my needs this seemed to be the exact fit I was looking for.   It is specified as having 102 detents on the volume control which seemed like a good range of sensitivity to me.  
What I find is it is only 6-8 clicks on the volume control from lowest/no volume to maximum tolerable volume which, to me, is quite disappointing for such a garnered piece/brand.  Especially with the 102 detent reference.  
Am I missing something?
pinball101
pinball101 OP
57 posts
 
John,

I shared the same concern as you experienced regarding the sonic signature they would introduce to the system.  Everything has an influence and I can't imagine a simple device such as this being very positive sonically.  

My next step is probably to contact the original designer(s)/maker(s) of the Edge amp and find out the input sensitivity.  I can also plug it into my other system and see how what the volume range is there.  

I was hoping this would be a simple response from other LS17 owners. 

Mike
geof3
1,124 posts
 
The gain on the LS17/SE rises very fast. There is a modification that ARC can do to smooth out the gain control to make it a smoother rising rate. Not too expensive. If I remember correctly less than $500.00. It’s a known “issue” with that pre. Just the way it is designed.  If your amp has input sensitivity control you can mitigate it that way as well.
georgehifi's avatar
georgehifi
10,312 posts
 
mike_ostradick OP

Mike you already have too much gain, you don’t need an active preamp with even more gain.
Get yourself a good 10ohm passive preamp, this gives an output impedance max of 2.7kohm and into your 30kohm poweramp you still have more that 1:10 impedance ratio so no problems.

Don’t go inserting line attenuators to bring down the gain, fix the problem with out using that band-aid fix.

PM: Second thoughts, just noticed you use a Nad M51 it has a volume control why aren’t you going direct into your power amp with it, again forget the active preamp??


Nelson Pass,

“We’ve got lots of gain in our electronics. More gain than some of us need or want. At least 10 db more.

Think of it this way: If you are running your volume control down around 9 o’clock, you are actually throwing away signal level so that a subsequent gain stage can make it back up.

Routinely DIYers opt to make themselves a “passive preamp” - just an input selector and a volume control.

What could be better? Hardly any noise or distortion added by these simple passive parts. No feedback, no worrying about what type of capacitors – just musical perfection.

And yet there are guys out there who don’t care for the result. “It sucks the life out of the music”, is a commonly heard refrain (really - I’m being serious here!). Maybe they are reacting psychologically to the need to turn the volume control up compared to an active preamp.”


Cheers George
pinball101 OP
57 posts
 
George,

Thanks for the suggestion.  Unfortunately the NAD M51 left last year.  Otherwise that would be a great choice.  

I did consider passive preamps when I found the LS17SE but I wasn't dialed into the gain balance concern. That explains a lot.  

Mike



More to discover