Class D


Been thinking of trying a D amp to reduce clutter. Most that I see are not rated at 2 ohms.  My PSB Stratus gold's will drop to 3 ohms or lower at some frequencies. So my question is will these types of amps handle this impedance ?
Thanks in advance. Chris
zappas
Fresh off the 1st post boat with a post like that, you really don't have to have to think much to see what's going on here???
Once a again...a thread turned into crap by the usual suspects and their usual arguments.


Yes like the ones and their lackies pushing yet to be released commercial products, with fanciful claims that will only be proved right or wrong "if" given access to by independent measurement testers.
Again, sorry I started this. Most have been very helpful. Maybe a couple of you guys should get together for a beer. Trying out the ps audio mono blocks. Still a little nervous about the handling of my speakers 🔊. Thanks for all your comments. 
Yes like the ones and their lackies pushing yet to be released commercial products, with fanciful claims that will only be proved right or wrong "if" given access to by independent measurement testers.
To be clear here, the 'fanciful claims' were made by Bruno Putzeys, a good 15 years ago with the introduction of his UcD module. And again with his Hypex and Purifi modules. These devices have been measured many times. Any of the claims I've made are a subset of those by Bruno.


So really the extraordinary claims are at this point coming from George. And to trot out yet another worn trope, he needs extraordinary proof to support his claims (beyond just wilful ignorance). So far, not seen it.