@cleeds wrote:8:18amslaw
Klaudio also made a model that omitted the tank and relied on a direct connection to a faucet instead. But the Klaudio units are currently out of production and rarely show up used. "
_________________________________________
I’ve had both the AD and the KL. As you probably know, there is a port on the rear of the original model KL (not the model that uses a separate tank) that you can unscrew to access the water reservoir. I use clean room poly wipes (non-impregnated and leave no lint) to wipe down the walls of that part of the machine. Interestingly, for new records that I didn’t pre-clean, the wipe would pick up a very fine gray/black dust- looked like grime. If I pre-cleaned a record (my normal practice with used records), none of this residue.
I don’t think this addresses the area where the the records are spun in the water- the actual bath. The DIY machines, with the open baths, are obviously accessible.
The biggest negative with that KL "port" is that the threads are very sharp and will cut your hands unless you use a tool to reach in (I have a large rubber tipped tweezer that I use to hold the wipe for that purpose). And, re-threading the cap on the reservoir can get tricky after a while; if not rethreaded tightly, it will leak.
regards,
A big problem with machines like the Audio Desk ( I own one) and the KL is the inability to be able to actually clean the inside water tank ..."I have the Klaudio. When the tank is drained, any crud is drained with it. There’s a window that lets you see inside the tank.
Klaudio also made a model that omitted the tank and relied on a direct connection to a faucet instead. But the Klaudio units are currently out of production and rarely show up used. "
_________________________________________
I’ve had both the AD and the KL. As you probably know, there is a port on the rear of the original model KL (not the model that uses a separate tank) that you can unscrew to access the water reservoir. I use clean room poly wipes (non-impregnated and leave no lint) to wipe down the walls of that part of the machine. Interestingly, for new records that I didn’t pre-clean, the wipe would pick up a very fine gray/black dust- looked like grime. If I pre-cleaned a record (my normal practice with used records), none of this residue.
I don’t think this addresses the area where the the records are spun in the water- the actual bath. The DIY machines, with the open baths, are obviously accessible.
The biggest negative with that KL "port" is that the threads are very sharp and will cut your hands unless you use a tool to reach in (I have a large rubber tipped tweezer that I use to hold the wipe for that purpose). And, re-threading the cap on the reservoir can get tricky after a while; if not rethreaded tightly, it will leak.
regards,