2. analog
  3. 161137-245

TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ?

Dear friends: This tonearm critical subject sometimes can be controversial for say the least. Some audiophiles swear for non damped tonearms as the FR designs or SAEC or even the SME 3012 that is not very well damped in stock original status.

Some other audiophiles likes good damped tonearms.


In other thread a gentleman posted:


"  If a cartridge is properly matched to the tonearm damping is not required. " and even explained all what we know about the ideal resonance frequency range between tonearm and cartridge ( 8hz to 12hz. ). He refered to this when said: " properly matched to the tonearm ".


In that same thread that a Triplanar tonearm owner posted:


" This is the one thing about the Triplanar that I don't like. I never use the damping trough...... I imagine someone might have a use for it; I removed the troughs on my Triplanars; its nice to imagine that it sounds better for doing so. "


At the other side here it's a very well damped tonearm:


https://audiotraveler.wordpress.com/tag/townshend/


Now, after the LP is in the spining TT platter ( everything the same, including well matched cartridge/tonearm.  ) the must critical issue is what happens once the cartridge stylus tip hits/track the LP grooves modulations.

The ideal is that those groove modulations can pass to the cartridge motor with out any additional kind of developed resonances/vibrations and that the transducer makes its job mantaining the delicated and sensible signal integrity that comes in those recorded groove modulations.

 That is the ideal and could be utopic because all over the process/trip of the cartridge signal between the stylus tip ride and the output at the tonearm cable the signal suffers degradation (  resonances/vibrations/feedback ) mainly developed through all that " long trip " .


So, DAMPING IS NEED IT AT THE TONEARM/HEADSHELL SIDE OR NOT?


I'm trying to find out the " true " about and not looking if what we like it or not like it is rigth or not but what should be about and why of that " should be ".


I invite all of you analog lovers audiophiles to share your points of view in this critical analog audio subject. WHAT DO YOU THINK ABOUT?


Thank's in advance.



Regards and enjoy the MUSIC NOT DISTORTIONS,
R.






Ag insider logo xs@2xrauliruegas
mijostyn's avatar
mijostyn
8,168 posts
 
Sota and Basis make the best pads IMHO but I have not listened to a lot of them. I think the clamping method is more important. In most cases reflex clamping will work with all but the most severely warped records and I do not have an of those. Vacuum is the best but admittedly more complicated and expensive. Dohmann is going to release his vacuum clamping system soon and he has told me that once the record is clamped the compressor turns off! God knows how he is pulling that trick off. Obviously his mat has to seal the record without any leaks. Sota used a low vacuum system with the compressor running at a very low speed.
I'm not sure what Basis or Techdas do in this regard.  
atmasphere's avatar
atmasphere
11,574 posts
 
I thought we were talking about oil or silicone based damping systems with troughs, paddles and goo. Obviously arm tubes can't ring which is why aluminum is frequently used. Stuff makes a worthless bell.
It appears that we're talking about all these things. Aluminum doesn't make a good bell, but its incorrect to assume that it won't have a resonance. I know a musician that uses aluminum bits he finds as percussion instruments.


BTW the first/only commercial use of Warren's platter pad was in fact on the Sota Cosmos. He told me that after about the first 100 or so they stopped using his formula. I ran serial number 0 of the Cosmos (it was white) for several years before replacing it with one of our model 208s. So when I compared the two machines side by side the platter pad wasn't a variable.
ebm
9,311 posts
 
If you damp use as little as possible and it also depends on the cartridge used.
Ag insider logo xs@2x
rauliruegas OP
12,779 posts
 
Dear @antinn  : really good articles the ones you linked even if the Audio one premise is: " perfect cartridge ".

@lewm  your FR ansd Acutex resonates at 4hz, spot on for warps and other bass anomalies but you lovwe it.

I understand the FR " fascination " because I still own it but I do not use any more as a fact I don't like any more heavy mass tonearms. In those articles we can see are not good enough.

R.
tomic601's avatar
tomic601
12,744 posts
 
Everything is a bell
More to discover