2. amps-preamps
  3. 160975-976

Are there any tube amps that don't give off any---

HEAT!! 
I have a very small dedicated listening room, and so I was wondering IF there are any tube amps..I guess hybrid or all tube ( although more all tube)- that simply give off NO heat or very very little heat after full warm up. Since the climate seems to be getting hotter, it would be nice to have the benefits of a tube amp with no heat whatsoever. ( is this even possible?). 
Running AC isn't my preferred way of listening in a small room, so this question is now on my mind. I do not want to consider Class D solid state amps...as I know they are an option from a heat perspective...but just tubes.
128x128daveyf
daveyf's avatar
daveyf OP
2,835 posts
 
@atmasphere  Punching holes in walls or floors is not an option. My dedicated room is a stand alone structure on a concrete slab. No basement. 

cakyol's avatar
cakyol
940 posts
 
Tubes have to heat their filament to be operational. That is their principle of operation. It is like the car engine which relies on an exothermic reaction to do its job. The amount of filament current may be less in some more modern designs but even then, there will always be SOME heat.  It is probably impossible to find tube amps which do not generate ANY heat. Correct me if I am wrong.

If you are so sensitive to heat, then you should get a class D solid state amplifier.

brite61
11 posts
 
Another recommendation for Berning. I use a ZH 270 with Guarneri Homage and they sing. The Quadrature Z are fantastic also. 
danvignau's avatar
danvignau
935 posts
 
Tube amps and Class A transistor amps run full steam 100% of the time.  You must decide whether the sound is good enough now, or with an added noisy A/C unit cooling your tubes.
wkmc
2 posts
 
this is crazy/ started reading this the other day, i got interrupted had to quit. if you want cool like i said, this is crazy if you want cool get a variac turn voltage down to 112/110/108/105 vac. tubes much cooler. 6l6s at 110 you can hold them in your hand(not responsible if you have very tender hands) this might satisfy your heat issues...and its cheap just don't use the power tool voltage regulators(voltage bounces too much)
More to discover