Sam here and this goes much deeper than i ever thought.


As you read this with an open mind it will make sense. l bought a high quality emf/rf meter so i could measure the dangerous amounts of emf/rf radiation coming from various appliances and 5g wireless in full swing here in kansas. what i discovered was the wiring within the walls of my apt, are emitting dangerous amounts of dirty electricity including very high rf levels and when ever i re-encoded audio on my desktop pc the dirty emf and rf would be encoded onto the digital audio ruining the sound quality.That got me to thinking if you have a commercial cd or digital download or a streaming service playing digital or a new remasterd vinyl album cut from a digital source it will have dirty emf and rf frequencies encoded onto the album along with the music and this would explain why digital sounds worse than vinyl cut from an analog master. now here is where it gets crazy? using my emf/rf meter for testing i discovered that when you listen to digital audio or streaming digital audio including vinyl cut from a digital source and the device you're using to listen to the audio becomes a broadcast antennia with all the emf and rf frequencies that were encoded onto the digital audio when it was originally encoded by the record companany are being amplified by your device and broadcast surounding you in dangerous levels of radiaton and the only way i could get the levels down to safe levels is to re-encode the digital audio using a shungite stone to absorb the dirty electricity and keep it from encoding itself onto the digital audio and the sound quality is 100% better.
guitarsam
Post removed 
A  Farady cage just wouldn't work in any case, sure it blocks noise from outside the room (or house, if you're so determined), but it traps those nasties that originate from within the room, and keeps them inside the room itself. Most of the time (depending on your particular locale), the noise inside the room may be worse anyway. 

There are far better ways to deal with all that, but like most things audio, we don't feel like we have much of a basis for being able to put any real faith into an audio idea or tech, until we have heard the difference it makes for ourselves.

My my, so many posts being removed...

Where IS he??? Should I be beginning to get a little worried about that li'l booger...??      Or maybe he got a job as a Mod...
Oh good Lord!
Can you imagine Katie as a mod!😱😱
There would be like 3 members left!
Me, myself and Irene.
Sounds like your having re-radiate issues with the power lines in your house. It’s common for wires, cranes, long metal things to re-radiat transmissions from antennas and transmitters. Not much you can do about it other then try to ground it out by a shielded wire run or filter it out with specific filters in your power supply. Not seem much for home use as it’s not usually an issue but check industrial safety sites and you may find something for the frequencies you have measured. 
One other thing your not using an internet expander that utilizes your power wires as that dose put other frequencies on the power line.