The difference between ''genuine'' and replica B-60 is $2000.
The genuine cost $2500 the replica $500. However this difference
is ''academic'' because the replica is not available anymore.
The only problem by the replica is the screw which connect the
outer and inner side of the VTA adjuster. As chakster and I discovered this can be easily corrected. One need to mark the
center position of the screw and then squeeze the opposite sides
with the vice in order to ''widen'' the ''nose'' of the screw, The screw
is easily reachable by unscrewing of the, uh, ''stabilizer''. Then
check for the horizontal movement and try again if not satisfy.
But one need to proceed careful because the most own just one
of those screws. So don't ''screw the screw''.
The genuine cost $2500 the replica $500. However this difference
is ''academic'' because the replica is not available anymore.
The only problem by the replica is the screw which connect the
outer and inner side of the VTA adjuster. As chakster and I discovered this can be easily corrected. One need to mark the
center position of the screw and then squeeze the opposite sides
with the vice in order to ''widen'' the ''nose'' of the screw, The screw
is easily reachable by unscrewing of the, uh, ''stabilizer''. Then
check for the horizontal movement and try again if not satisfy.
But one need to proceed careful because the most own just one
of those screws. So don't ''screw the screw''.