Power Cable ~ $300 - Which to get? Nordost, Audioquest, Furutech, Shunyata, Zavfino?

There are a lot of good power cords available mentioned above. I haven't tried that many of the ones mentioned but they do make a huge difference. I have a whole set of Shunyata Venom HC power cords. The difference from stock cables is dramatic. I am now using ESP Music Cord Pro because I felt that they were more transparent than the Shunyatas. A lot depends on your system. The Venom And ESP Music Cord Pro are entry level affordable cables from these companies and  are great for the price. I'm sure there are a lot of other affordable great cables from the other companies mentioned too. Also, it depends on how  the music you are playing is recorded and mastered.

alexb76 - yes, you can do that and shouldn't have any problems.  There is no soldering in power cords and the wires should be clamped in the sockets in the plugs.  It is not difficult to do this but you should check whether it is legal to change power plugs in your country and also that you know the wiring convention: e.g. the USA hot wire is reversed compared to some other countries. 

But orenstein it would be good to know what wire Luna use in their cables.  They say it is tin-plated copper but don't give much further description than that.  DH Labs have full disclosure on the power cables they produce.  I have no association with DH Labs - I just like companies that tell you what they are doing. 

ypingping......
At their higher levels (red and black) they use "old new wire", meaning wire that was originally produced back in the 40's.  As you can imagine, this is very rare, but is supposed to have properties that newer wire does not have.  I'm no expert on the technical aspects of anything, but Danny Labrecque, who is a co-owner of Luna and the man who actually builds all of their cables can surely address any and all questions you might have.  You can reach him at [email protected] .

Alex, Have had some nice experiences w/the genius of David Schultz's products, so I was curious to see his DIY video on youtube on power cord building. Since you mentioned an interest .. it might give you a step up in the level of cord your produce.
I built a couple based on Supra cables raw p.c. .. Defintely a step up from base cords, but found them not quite in the same class as Shunyata Python. Also used Ice Age Audio 20A (heaviest gauge p.c. at the time), but replaced that as dollars and equipment evolved w/ a Shunyata Python also, it performed well, nice construction too. Ice Age offers raw p.c. & I think his DIY cord is already CRYO'ed.
I have just been migrating toward a Shunyata "loom", and like what I hear w each step. (if you just want to throw the dollars in & not mess around, the Shunyata Deltas are an awesome value)

Just some thoughts, Have fun!