Turntable that will be around heavy foot steps?


Looking for suggestions for turntables that would be used in a show/demo environment where there would be heavy foot steps/footfall about 3-6 feet from the turntable. Think Headfi vendor exhibition tables if you've been to a Canjam or the like.

Using it with an isolation platform is also an option. Lets say under $10k for used including the tonearm.
128x128dnath
SOTA turntables are genuinely fantastic at this, and getting one is a hell of a lot easier (and more aesthetic) than trying to isolate for your specific room/floor/etc.

Outboard spring/mass solutions may work well too, but SOTA’s suspensions are simply tuned perfectly for their own mass, and oscillate at the right frequency to deflect most of the damaging energy - not like the super-springy, unstable suspensions on other turntables that you may recall from the past.
Dear @dnath : The @testpilot  advise is the best you cn try no matters TT type/design.

Yes, the SME 30 is great great on that regards but never for 10K not even second hand.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
The Luxman PD-171A is rock solid. Weighs about 60 pounds. I can even tap on the TT and nothing happens. Plus it is a real looker.
Suspend from an aluminum frame using bungee cords. Problem solved! 🤗