2. speakers
  3. 129569-9818

Isoacoustics Gaia Speaker Footers

Replacing the spikes in my Soundocity outriggers (Soundocity made me a set of outriggers with threaded holes) with the Isoacoustics Gaia 2 footers has improved the sound of my Merlin VSM speakers.  They now sound more open and articulate than with any combination of Z-feet or other spikes, with or without outriggers, on the floor or on a platform, that I've tried.  Like the Townshend products the Gaia footers completely decouple the speakers from the floor, allowing them to float.  See:

http://www.audiostream.com/content/isoacoustics-gaia-isolation-pucks#IVXH8EtVAjQdwbuj.97     

http://www.isoacoustics.com/products/gaia-series/gaia-i/


128x128cellcbern
richfern
2 posts
 
Hi Cal I have a set of GAIA 2 that wont work with my Wilsons  I am interested in the ones didnt see them listed?
cal3713's avatar
cal3713
1,421 posts
 
@richfern pm sent.
wrm57
974 posts
 
I’m thinking of putting Gaia I on Sound Anchors stands under PMC IB2i speakers, replacing stock spikes and Herbie’s glider cups. Can anyone tell me whether, once installed, they are easy to slide on a hardwood floor, or do they stick in place? I’d like to be able to fine-tune speaker positioning very precisely once these are installed, and that requires sliding in tiny increments.
Ag insider logo xs@2x
sonelectric
32 posts
 
As far as sliding goes, these behave like grippy suction cups. It's just a no-go. I use some nylon furniture sliders purchased at Home Despot for positioning, these are about 1/8" thick and available in many diameters- I use a 2.25" set for Gaia 1s, then remove them once optimally positioned. Works like a charm. For carpeted installations the spiked cups, really do help significantly. At least, that was my experience. Hope this helps.
mboldda1's avatar
mboldda1
575 posts
 
do not slide, you will damage them. there is a warning that comes with them.
More to discover