2. amps-preamps
  3. 137763-4294

Anyone using a Class D amp w/ribbon tweeters?

I'm looking for some feedback about using a Class D amp 
with speakers that use ribbon tweeters. 

Anyone have any experience? How do they sound?

At least 3-4 years ago I was still believing that ribbon tweeters 
were not a good mix with Class D b/c of the sibilance it produced from the tweeters.

But now we have gone from ICE modules to NCore, Pascal, etc 
and other proprietary designs (Dig Amp Co) that may not be so bright, digital etch, etc

Anyone know about using more modern Class D amps with 
ribbon tweeters while having better control of the high frequencies?
Thanks
Gary
128x1281graber2
aolmrd1241
1,010 posts
 
1graber2...Sure you can ask. I am using the Merrill Audio Veritas mono block amps driving the Acoustic Zen Crescendo Mark II's. A little piece of heaven...  
1graber2's avatar
1graber2 OP
303 posts
 
@jackd 
I listened to NuPrimes some years ago (2010), 
at that time, I wasn't too impressed, and unfortunately wrote them off.
Unfortunately b/c now apparently they have received many compliments. Will have to try them out again ....
1graber2's avatar
1graber2 OP
303 posts
 
@georgehifi 
once again George, thanks for the info
jackd
1,037 posts
 
Would be worth the effort as like all the Class D modules they have improved a great deal over the years. 
erik_squires
15,647 posts
 
@1graber2 

I am using ICEpower 25 ASP based mono blocks. One under each speaker. Literally. :) 

My ribbons are from Mundorf. Sound fabulous, but electrically VERY different than a ribbon.

Ribbons tend to be very low impedance, and need a matching transformer.

AMT's have no need for a transformer, and are almost purely resistors (relative to most drivers). 

Best,

E
More to discover