Carver Raven 350 Amps


Has anyone heard these amps?
They supposedly can produce 350 watts per channel which in my opinion is remarkable for a tube amp. I have the Atma-Sphere M-60’s 3.3 and I love their tube sound.

But I am curious, Bob has made some very interesting products through the years.

ozzy
128x128ozzy
Ozzy, just realize that all manufacturers claim every new version is significantly better than the older version ;)

You shouldn't have any output tube failure in the first year of operation. I have owned the Carver amp for 8 years now with zero output tube failure.

I think crossing over the speaker at 80 Hz and letting the M-60 handle everything above is a very wise decision.  I have a 2 way speaker that is relatively efficient (89-90 dB) with lowest impedance 5.8 Ohm at crossover, mostly >8 ohm.  I was told by Atmasphere this shouldn't be a problem, but the bass was just too loose for my taste.

The Carvers should have no problem with Maggies.
dracule1,

I have heard from others that the Carver Raven 350 has a severe drop off in the higher frequencies. I am concerned about that. Can you comment more about that?

Thanks, ozzy
Ozzy, That has never been my experience with any of Bob's tube amps (I've heard the 350 and Silver 700 monster as well.). 

Context is very important.  What was the preamp, source, and speakers used to evaluate the 350 that showed "severe" drop off of the higher frequencies?  Were the tubes in the 350 stock?  The stock Shuguang KT88 are on the bright side in my opinion compared to the for example the Golden Lion K88 reissues, which are more natural sounding but can sound a little recessed in the highs.  Did the person who evaluated amp make sure the tubes were functioning normally?

Good thing about tube amps is that you can roll tubes and suit the sound to your taste to a certain degree.
dracule 1,

So you think the Carvers 350's have a decent top end?
Even the review of the 305 hints about a darken sound.

ozzy