Would love some feedback / Denon DL-S1 / phono match / cart recomendations


Would love some feedback / Denon DL-S1 / phono match / cart recomendations

- Vinyl newbie and need some help

- Friend has a brand new  Denon DL-S1 for $600 - good deal?

- I have a Mark Levinson No.326s preamp and just bought the dual mono MM/MC Phono module boards. They are the identical boards from the No,32 preamp and read that was a very nice sounding phono preamp.

- No.326s only has a couple settings 42db or 60 db and 47k ohm or 200 ohm load

- I picked up a used Bob's Device 1131 thinking it would help as my No.326s has limited setting options and read the 1131 might not work well with this cart. That this cart is tough to get the most out of but can be great.

- Should I get another cart? Was it a mistake getting the 1131 SUT. I read the No.326s sounded nice with this SUT so went for it but don't know enough to really know better either way but trying to learn.

- The No.326s phono boards has these little gold terminal screws with easy tighten by hand little knobs on the heads of the screws to add either capacitor or resistor to make the phono very adjustable but would have no idea how to figure out how to use that but thought to mention

- just wondering if this is a bad cart for me to try with my phono and SUT set up and any feedback about anything related to a cart would be super appreciated if anyone reads this. Thanks

more info if helpful below but not need to answer my question just thought to add it :)

______________________________________________________________________________________


I just finished up a full system re-fit with some tweaking here and there still to do but I am extremely happy with the sound I’m getting today from my new to me system. I sold my entire old system that was tubes and high efficiency speakers and got new to me: speakers, amp, preamp, speaker cables and upgraded digital transport and got a new turntable. Kept my DAC never changing that. Love my DAC. 

This system is the best I’ve personally ever had. I’m pretty psyched - so psyched I just added a turntable. 

A modern Version of the VPI Prime Aries with HRX Feet, 10" 3D Arm and Base, Prime Signature Platter, Ring and Motor. 

I am looking for a cart and my friend has a new Denon DL-S1 for $600 he also has a  used but good shape Clearaudio Accurate mc cart for a few hundred but i never heard of this one and a  van den Hul blackheart grass hopper which I know nothing of.

I thought because the Denon is new never used that was the best option but any of you know anything about the other let me know please.
  
Would love some feedback / ideas / thought recommendations and help. I’m a digital guy and want to give vinyl and honest to goodness try.

As stated above I just purchased the dual mono Phono board modules for my
Mark Levinson No.326s linestage so it’s now a full function Preamp and added a Bobs Device 1131 SUT and both were attained a very reasonable cost which was great!

Just not sure if these carts will go with my phono and SUT.

Rest of my System:
https://systems.audiogon.com/systems/5160

- Magico S5 Loudspeakers
- Pass Labs X350.5 Amplifier
- Mark Levinson No.326s Preamp/phonostage
- Bricasti M1 Special Edition DAC
- PS Audio P10 Power Plant
- Kubala-Sosna Emotion SC’s
- Nordost/Cardas IC’s
- Assorted PC's Verastarr/Cardas

- Digital PC based front end that I have been tweaking and evolving:
- Sonore microRendu 1.4
- Full Suite of UpTone Audio Gear
(2) x LPS-1 Ultra Capacitor PS
JS-2 Linear Power Supply
(2) Regens - ISO/Amber
- (8) Canare / Oyide DC cables
- (2) Breeze Audio 12v LPS
- Tellurium Q Black Diamond Reference USB cable
- Curious Regen Link USB Cable.

This Digital Front End beat out: Lumin, Antipodes, Naim and Auralic servers. It needs everything to work so well but man does it work great. My hope is that a turntable can complete and wish some luck I end up liking it better. That’s why I’m asking for help. I want to put my best vinyl foot forward 

** Back Ground info**

** Room is **
14 x 24 w/Cathedral Ceilings - 16 Foot a peak

** Music likes **
Assorted Music but no metal or loud hard rock anymore really - not much Large Scale classical either but everything else. I listen just loud enough to sound its best but not a loud listener. I enjoy normal levels.

** Likes / Priorities **
Transparency - Delicacy - Linear - High resolution - microscope but not sterile not etched or lifeless -some natural warmth and life to the music is key  but love that see through transparency and love precise soundstage - remove as many layers without being clinical - tight bass - hate flab - but don’t need worlds greatest slam but love speed and accurate bass while being musical.

** Perspective **
I’m only a couple months into this new system and I was struggling to get the right Preamp and tried a half dozen or so searching for the right balance and the one that could bring my new system together like only the perfect matching preamp can do. Each system is different so really it must be heard to know it’s what you want. I believe in the Preamp and knew If I could find the right match it would change everything. Well that was the hope.

To make a long story longer the Mark Levinson No.326s preamp did this and more. I was hedging my expectations based on the disappointments of the others I tried and failed but the No. 326s nailed it and honestly it an incredible Preamp and then some. I was so happy I decided to upgrade and add the built in phonostage option and SUT and Turntable here we are trying to chose a cart.

Really appreciate any help you can provide! I know this is kind of long but wanted you guys to know where I’m coming from! If you would like more info please let me know - all comments and feedback are most welcome and deeply appreciated :)




128x128Ag insider logo xs@2xfsmithjack
Agreed.  It's worth having a step-up in your arsenal for very LOMC.  If you're not satisfied, you can always experiment with an alternative SUT at a reasonable cost relative to a top LOMC cartridge. 
I've used that cartridge with a Cinemag SUT & it sounds good together. That cart has a lot of detail, although it's not bright. For the music you listen to, it should work out well. Literally wore that one out. The suspension gave way after many, many, hours.  
Go for the VdH Grasshopper. VdH's carts always sound awesome. In another league. The exposed body is delicate so be very careful when mounting and adjusting it and keep anything magnetic, especially screwdrivers, far, far away.

Dave

After 40 years in this hobby I deed it the other way round.

''My kingdom for a horse'' is focused on the person and his

needs. But what  about the horse? My brother Don (Griffits)

loves his dogs more than anybody else. To me a horse is much

more and more impressive than whatever dog. In short I just bought

for the first time in my life a cart for a SUT. There are people who

are scared by  horses while I was scared by the SUT's. Why?

Well because Dertonarm whom I much admire advised

''correspondence '' between inductance and impedance of both

component . In my case this would mean at least 10 SUT's.

Alas I am not family member of  the family Rockefeller. I don't

even believe that ''our Thuchan'' owns 10 SUT's despite the

fact that he owns more than 10 TT's . Nearly as many as  our

Lew who, curiously, does not own a single SUT. Anyway I ever

bought Denon AU-S1 which, according to its manual ''covers

 2 till 40 Ohms '' carts. My MC collection  ''covers'' about 30

''top'' MC carts. I was so impressed with  my Denon SUT that

 I treat the thing as if it become my ''primary''  horse.

For ''him''  I  bought the S1 cart which, also according to the

manual, was special made for the AU-S1. I obviously care

for my SUT . In about one week time both will be united.

Till then than.