Audio cables ,and power cords the most forgotton- part of an Audio system.


I have been in Audio for over 35 years and owned and operated a  Audio store as well as buy just from the A list ,which does not guarantee system synergy.
I have tried   inexpensive cables like blue jeans  that is fine for a entry level system. 
If you have electronics $5k and up and 5 figure Loudspeakers then to get ultimate resolution 
You have to spend some money's on cables.my last cables 2pr interconnects  and a pr of 6ft Speaker cables 
I had, Silnotes, Analysis plus  even more expensive Synergistic research.  Decent but not the realism I was after.
To get to that last5-  10% + in fine detail and resolution you have to spend. I was stubborn but really 25% for example.Of your total cost is not that much. When you see just how much refinement and fidelity 
You may be missing .My brother brought over his Verastarr power cord over to try on my digital 
Which is most sensitive,  I had a $600 Kimber power cord, his grand illusion cord made the music so much more real,there are other very good cables but these are one of the best I have ever heard without breaking the bank. . Is that worth over $1k ?  I did the same with interconnects and speaker cables 
I spent $6k  and still have s few power cords to go. One thing my system as a whole is a minimum of 10% better. And  a you are there on any decent recording.   Fine tuning with Duelund capacitors
Bypass and coupling caps are next and final step in tweaking the system and a bit over priced. and these may be equal to or better  in added tonal balance and depth. 
This just proves having the best speakers or electronics is only half the battle.
You are only as strong as your weakest link .
128x128audioman58
To be totally honest I am far better building an Audio system them grammar, my opologies.
toddverronne
I like audioman58 he has a lot to offer. 
With that said your comment was funny to me. 
I don't think english is his first language. I may be wrong though. 
I tried all manner of cables and like an earlier poster the New Duelund wire is as good as I have heard. No connectors, fully broken in they are just wonderful.  
+1 grannyring.

I pretty much agree with grannyring. I know some people aren't into DIY, therefore they want to purchase and pay more money for a finished pair of cables, not that there is anything wrong with that.

Shortly I'll be testing a new product (bananas) on the ends of my New Duelund wire (fully broken in) to listen for improvement vs no connectors.
Crimp connectors like the Furutech 24k Gold over Phosphor bronze is night and day better then solder ,lead is not too good 
of a conductor. My speakers  have Goldplated Copper Mundorf screw terminal Xover board. If you use bare Copper buy the Stabilant-22  it not only enhances the conductivity,but prevents 
oxidation for  a minimum of over 12 years if not disturbed.
go to the Stabilant site. if NASA uses it it is superior.