2. speakers
  3. 127844-9807

What is best tweeter height for the Devore O/96?

On the Devore Orangutan O/96 with the supplied stands from Devore Fidelity, the tweeter height is approximately 31.5 inches from the floor.  By comparison the tweeter height on the Devore Gibbon X is much higher at approximately 36 inches from the floor.  As a general rule, I always thought that it was more ideal to have tweeter height at approximately 36 inches, with the goal of having the tweeter at or near ear level, while in a seated listening position.  Why does the O/96 have such a low tweeter height?  What would be the effect of raising the O/96 to elevate the tweeter height to ear level?  John Devore could have made these stands any height he wanted for optimal sound, so why have the tweeter height so low?  Thanks for your comments.
bayreuth
sunnyjim
927 posts
 

sfar,  I am happy for you; but I have a right to my opinion.  If you have the money to afford Devore's $12,000. O-93 and 0-96    God bless and good luck.

There are better speakers out there for half the price

frazeur1
340 posts
 
sunnyjim, you are certainly entitled to your opinion, this is a forum after all. What I do not understand, and it seems others here as well, is why you come onto this particular thread and start commenting on the reasons why you don't like Devore etc., when the question from the original poster was actually a good question about Devores, not the merits or opinions of those that may not like them and why! Anyway, moving along....
ladok's avatar
ladok
96 posts
 
Well Beyreuth, it appears the Pass XA30.8 is a behemoth of 100 lbs., that eliminates it from consideration for my particular age and spine demographic. Maybe the XA30.5 or the First Watts for me.
bayreuth OP
25 posts
 
Try the First Watt J2.  The J2 is a really good amp.  It's lightweight and easy to move, and sounds splendid with the Devore O/96.  Yes, the XA30.8 is built like a tank and weighs nearly as much.  Tremendous build quality and sound.  
keithr
1,304 posts
 
sunnyjim, you're welcome to your opinion but unfortunately you are offering speculation. John's cabinets are made by a furniture maker in the same building - he designs fully custom drivers with Seas (which take several years to get right). yes, he has some unique design elements including controlling resonance in the bass. hardly any manufacturers have anechoic chambers while computer modeling is ubiquitous in the industry. 

i'm sure we'd all like to hear the better speakers at half the price, but to demean a manufacturer when you haven't heard the speaker based on a measurement in stereophile is pretty weak. No, his speakers aren't cheap but they aren't made in China either.

ps. John responded to the measurement police at part-time audiophile which is more than most manufacturers do - feel free to read

More to discover