mc cartridge loading

I'm with you lewn.....Most of my cartridges operate at 1000

The loading only needs attention if the phono section is sensitive to RFI at its input. The RFI is generated by the cartridge itself in part due to the afore-mentioned resonance that is set up by the inductance of the cartridge and the capacitance of the interconnect cable from the tone arm. If that is kept low and if the preamp is stable the loading will have very little effect.

What is happening here is Audio Technica is essentially stating that the preamp they use isn't stable. Just because that is so does not mean that it is that way with you. If you do hear a difference (usually an improvement) with loading, it suggests that the phono preamp is unstable at ultrasonic or RF frequencies.

Bottom line: loading is about the phono section and not the cartridge.

In all the years I have been reading and talking to engineers who are involved with step up trans and carts this is the first time I ever heard this.

You can argue that the best impedance match on paper might not be the best sounding one.  But there Is a difference in sound.  It sounds like he may not want to go through the effort to experiment but it may be well worth the effort in his system.

You might look to some other forums where there are a lot of comment on this subject.

Enjoy the ride
Tom

While loading is always the question i want to remind about phono preamps with so called "Automatic Impedance Matching" for any cartridge. One of them is WLM Phonata from WLM Acoustics. I believe it was probably made by Trafomatic Audio for WLM Acoustics (Austrian-Serbian collaboration) and i think it’s out of production now. Anyway, that’s what i use, not sure if i miss something with loading, but with this device i can forget about loading at all - right? "This unique preamp has automatic impedance matching so that the input impedance for the cartridge is perfect each and every time."

p.s. I've posted WLM Phonata's specs here on audiogon before.