Recommnedations for moderately price balanced IC's, and adaptors to an RCA end


The title of  the thread may be a bit unclear. However, I need recommendations for a "moderately" price balanced interconnects.  Also, are there quality adaptors to convert a balanced end into an RCA input or output without major signal loss??

I want to use my Rogue Sphinx hybrid integrated as a pre-amp because it has a variable output (pre-out) for an second amplifier, and connect it to a Balanced Audio Technology VK-200 amp that will  only accept balanced. IC's  

The Rogue integrated has all RCA input and outputs .Therefore, I also need a recommendation for two XLR to RCA adapters.   Eventually, I will buy a separate pre-amp, possibly the new Rogue RP-1.  

Thank you  




sunnyjim
Mogami Gold 2534 analog cables are available with mixed RCA/XLR connecters. I use all XLR cables to connect 3-way active stereo crossovers, processor and amps.  I’ve used 2534 cables with mixed connectors from a pro to amps. The signal transition through different connectors is musically smooth and well balanced.  Mogami’s digital 110 ohm AES and 75 ohm RCA cables are very clear in my experience with transports. They’re on Amazon, audio storefronts, and Ebay from top sellers.      

Cardas makes XLR-to-RCA and RCA-to-XLR adaptors, but they aren't particularly moderately priced considering the fact that they are made of brass, a not particularly good conductor.
However, I need recommendations for "moderately" priced balanced interconnects. Also, are there quality adaptors to convert a balanced end into a RCA input or output without major signal loss??


Define "moderately".

If by that you mean as inexpensive as possible, you might want to go and check out a big musical instrument store, (around here we have "Guitar Center" stores).
These types of stores will have the cheaper types of adapters you are looking for.  They tend to sell professional equipment so they should be made decently, and yet cost just a few dollars.  (I have a pair of RCA to XLR adapters that were all metal, and sounded just fine.)
They have balanced cables too, but I have no idea on the quality of those, as I did not try those out.

My two cents worth.
Good luck in your search.

If your system can take silver without being bright, I recommend the xlr cables from Mark Tunis. I have them on my warmish sounding amp and they are great. Dirt cheap too.