sub wiring question


i just bought 2 SPL Velodyne sub ,im using them for 2 chanel music , the sub has SPEAKER LEVEL INPUT and RCA LEVEL INPUT , im using A308 cr musicalfidelity power amp , my amp has rca output , so my question is which way should i connect between SPEAKER INPUT or RCA INPUT , could you guys tell me which way the best for my sub , and without
affecting the performance of the amplifier ,Any help would be amazing.
duypham
If you have an extra $450 available, I'd grab a Velodyne SMS-1 and run pre
out R and L into the SMS line in R and L with RCAs and then the same scheme
from the SMS line outs into the subs. This will roll off your mains and your
subs. If you have 2 sets of RCA out from your pre, you may wish to run one
set per Kal's set-up and one per mine. This will run your mains full-range.

Either way, IME, you'll be happier.

Marty

PS search "SMS" in these forums and you'll see my (never ending -
sorry!) commentary on this excellent product.
Another excellent option is the nht x2 crossover which is much more flexible than the SMS, although it lacks the EQ.

So, which SPL sub do you have? With or without the auto EQ?

NHT: http://store.nhthifi.com/X2-Electronic-Crossover?sc=12&category=1334

Kal
Re: Kal's comment on NHT X-2

I use an X-2 for high pass and an SMS for low pass and EQ

IMHO, this is a "best of all worlds" solution, but I thought maybe more complicated than the OP wanted to hear about.

Marty

PS the auto EQ on the SPLR subs leaves something to be desired. The SMS satisfies those desires.
Use the speaker level inputs, it lets the flavor of your main amp come through the subs amps and blend better with your main speakers.