Swap my klipsch heresy's for Ohm walsh 2


I have an 20 year old pair of Klipsch Heresy's that are in
excellent condition that I can swap for a pair of Ohm
walsh 2's--I realize they are a completely different sound-
any thoughts?
128x128rbaker
One more thought. Just to see if my impression of improved dynamics was
the result of my "acclimating" to the speakers or whether the
speakers had actually improved, I briefly dropped my pair of Zingali 3s back
into the system the other day. These horns are about the most dynamic
speakers I own (although, in fairness, my Merlin VSMs are probably just as
good. I chose the Zings because they're easier to flip back into the system
than the VSMs). Two impressions:

1)The Zingalis do sound a bit more dynamic. More significantly so at modest
spls, much less obviously as the volume knob went up to my preferred
listening level.

2) I vastly prefer the Ohms overall.

One disclaimer - I use the Ohms with subs.

Marty
Marty,

keep in mind that the poster is talking about original Walsh 2's from the 80's I believe, not newer ones with model 100 drivers of any series.

There is a big difference believe me (I've owned both concurrently and compared). The original Walsh 2s roll only go to 17000khz or so according to published Ohm specs whereas the newer drivers use a different tweeter and extend further.

Original Ohm Walsh 2s sounded a bit dead or flat compared to the newer 100s to me as well, which is why I upgraded.

Otherwise dynamics in general were also not to the level of the newer 100s with the same amp driving them.

Most people out there who own OHM walsh speakers own the originals, which were sold through various hifi chains in much larger quantities back then.

The newer series 3 drivers have only been out for a few years and only available direct from OHM. They cost more, and have teh level of overall refinement in the sound one would expect these days. The originals were still pretty good, but not in the same league soundwise IMHO.

The thing to do is pick up a pair of cheap Ohm Walsh 2's on ebay and order the upgrade for $800 or so. This gives you the best sound possible for the least amount of money.

Walsh 2's sold for $800/pair back in the 80s. New 100 series three cost twice that. The upgrade however costs the same as you would have paid back then but is in a totally different league.
Keep your Heresys.

Depending upon where you are located, you might want to come by and take my Walsh 2s off my hands - free. I have not used them in years, bought them at salesman's comp price back in the 80s. Match-grain oak. Cabinets are fairly good, "top hats" need re-clothing, one speaker needs the top driver repaired.

I am located near Washington, DC...

-RW-
Rlwainwright's offer + $800 for new drivers = something to think about.

Keep in mind there is a few hours of work involved to upgrade original Walsh 2's to 100 series 3 drivers yourself, but it is not that hard if you are comfortable using a glue gun.

Or ship them to OHM and let them upgrade.
Map,

Although I read Mechans' post in a different way than you did (I don't know if he's auditoned only older model Ohms), I was just making a point about my experience with Ohms and dynamics:

I underestimated the speakers' ability in this area for quite some time because of certain variables which I didn't appreciate at the time - notwithstanding your posts which frequently pointed those factors out to me!. Mechans' experience may be due to the dynamic characteristics of the older models he's heard or they may be due to a situation like my own. Either way, I'm just cautioning others from repeating my mistake.

Marty