803D or 802D


Looking for some opinions. I currently have...

B&W CDM9NT Fronts
B&W CDMCNT Center
B&W CDM1NT Rears
Sunfire Signature EQ sub
Adcom GTP-870HD Receiver
Adcom GFA-7805 300x5 amplifier

This amp seems to have too much power for these smaller speakers. Primary use is Home Theater and Music. I was thinking of getting the 802D or 803D's with the HTM2D center, and also changing the sunfire sub to a JL Audio Fathom 113. I sit about 8- away from my speakers. Since it's a great room setup with 11 foot ceilings the room is fairly large. I no longer like having the rear speakers this close to me. I'm thinking about going with wall or ceiling mount rears now for my 5.1 setup. I'd like to hear some opinions and get some good advice on this. Thanks to all.

Chris...
ccmviking
Post removed 
I tend to agree with bob. I don't thick it's possible to have too much.

You say it "seems to have too much power for these smaller speakers"

What are the speakers doing that make you believe this?
They just sound a little stressed at high outputs and I had to change out a few tweeters already. It's not that the woofers/mids are bottoming out or anything. My biggest complaint is that I keep burning tweets. I want something that I can play at high volumes, that sounds fantastic, and not damage.
I have a music/HT setup with 803d, matching center(HTM1?; the one with the diamond tweeter but not the rounded head) and ceiling mounted b&w (I forget the designation, but they are the ones that look like directional, not surface mount, about five inch mid with alum tweeter in center, maybe CM16 or similar?). I drive all with an Anthem A5 amp; can't stay in the room at anything close to max volumes with no clipping. I also use the b&w ASW 825 sub.

The room is quite large, 20x25 with 13 foot ceilings, but this system can fill it up.

I really like this setup; have run for about 1.5 years. Having said that, I can't see where you could go wrong with the 802 either.