McIntosh MC252 with Totem Mani2 / Sig's


Need some advice...

how well will the McIntosh MC252 drive my Totem Mani2 Sigs? i use 22' long runs of kimber 4tc, and wonder if the mc252 has enough juice. Would consider stepping up to the MC 402, but that is a lot of $, and I'm not sure i need 400 watts. let me know what you think!

also, can i bi-wire my mani2's buy hooking up two sets of speaker cable to one pair of speaker terminals on these mcintosh products? would that put too much stress on the amp?

thanks!
skuras
Your room is small. The room I auditioned the 252 in was 30' x 35'. This room size will have more impact on the power requirement than the speaker impedance difference, I believe. I don't think that the 803 is really considered that easy a load.

But, if you can get the 402, by all means do so! No question about it.
Check the power rating for the Mani-2s. Its power rating is 50-200W. Look at the MC-252's power meter and you will see it is pegged at 500W--, and its there for a reason. The Mac amps have very good headroom and can exceed their power ratings for brief periods as can most amps. You will likely during normal listening levels not exceed 50W 90% of the time, probably 12W is not often exceeded. Read also Sam Tellig's review of the Mani-2 whilst driven by a pair of Cary CAD-300SEs. Put it all together, and anything over the MC-252 will be beautiful to look at, a joy to own, and you will kow you have the best for the rest of your life, but a lot of machinary sitting there and lookin' great and most of the capability unused. But this hobby of ours is way more than just economics!
Skuras,
It seems you are set on getting a mac amp. If that is the case then having the flexibility of a larger amp {402} will allow you not to have to change your amp if you go with a speaker with a heavier load in the future.
ladies and gentlemen...

i just bought my brand new McIntosh C2200 vacuum tube pre-amp and MC252 power amp. i'm very comfortable with my choice, as i have done a lot of auditioning in the last week or so, and i am not convinced that i need all the power that the 402 provides. the other deciding factor was simply the size of the 402, which would have forced me to get a new equipment rack. along with the $1200 or so price difference between the two amps, i would have been looking at another $700 or so in costs associated with having to reposition my whole system.

i love my totem mani2 sig's, and i love my musical fidelity tri vista SACD player. i would never part with either of them. now i believe that i have a pre-amp and power amp that i can also live with for the long haul.

thanks for all your input - it is much appreciated!
Congratulations! I wish I could say the same as you. What were your thoughts on the sound comparison between the 252 and 402? I guess you felt the 252 was good enough but i wonder to what degree. Thanks.