What Does Holographic Sound Like?


And how do you get there? This is an interesting question. I have finally arrived at a very satisfying level of holography in my system. But it has taken a lot of time, effort and money to get there. I wish there had been a faster, easier and less expensive way to get there. But I never found one.

Can you get to a high level of holography in your system with one pair of interconnects and one pair of speaker wires? I don't believe so. I run cables in series. I never found one pair of interconnects and speaker wires that would achieve what has taken a heck of a lot of wires and "tweaks" to achieve. Let alone all the power cords that I run in series. Although I have found one special cable that has enabled the system to reach a very high level of holography -- HiDiamond -- I still need to run cables in series for the sound to be at its holographic best.

There are many levels of holography. Each level is built incrementally with the addition of one more wire and one more "tweak". I have a lot of wires and "tweaks" in my system. Each cable and each "tweak" has added another level to the holography. Just when I thought things could not get any better -- which has happened many times -- the addition of one more cable or "tweak" enabled the system to reach a higher level yet.

Will one "loom" do the job. I never found that special "loom". To achieve the best effects I have combined cables from Synergistic Research, Bybee, ASI Liveline, Cardas, Supra and HiDiamond -- with "tweaks" too numerous to mention but featuring Bybee products and a variety of other products, many of which have the word "quantum" in their description.

The effort to arrive at this point with my system has been two-fold. Firstly, finding the right cables and "tweaks" for the system. Secondly, finding where to place them in the system for the best effects -- a process of trial and error. A lot of cables and "tweaks" had to be sold off in the process. I put "tweaks" in quotation marks because the best "tweaks" in my system have had as profound effect as the components on the sound. The same for the best of the cables, as well. For me, cables and "tweaks" are components.

Have I finally "arrived"? I have just about arrived at the best level that I can expect within my budget -- there are a couple of items on the way. In any case, I assume there are many levels beyond what my system has arrived at. But since I'll never get there I am sitting back and enjoying the music in the blissful recognition that I don't know what I am missing.

I should mention that there are many elements that are as important as holography for the sound to be satisfying, IMO. They include detail, transparency, coherence, tonality, and dynamics, among others. My system has all of these elements in good measure.

Have you had success with holographic sound in your system? If so, how did you get there?
sabai
Now, to return my discussion to the topic of the thread...

Regarding discussion of various technologies which produce the "holographic" soundstage, I have found no greater technology than the Omnidirectional speaker. I have used far more capable speakers, but none create the specific "holographic" experience like an Omni.

There is a dearth of omnidirectional speakers in the market, imo. I felt the King Tower, which I obtained as a cancelled product it seems from Kings Audio, is a fantastic device at the price point. If it had been set up well and showcased at shows vs. put off to the side and not run I believe many would have been sold.

Then again, the zany blue foam balls which were stuffed between modules didn't help! I removed them immediately, which improved the speakers performance markedly.

But as to the most profound way to elicit a holographic soundstage - imo it's the transducer technology. Why? Basically any piece of gear (excepting special conditions ie. low power amps etc.) will alter the "3-D-ness" of the soundstage to a degree, but never as much as a complete technology shift in terms of a speaker. Whereas different cabling, amps, etc. display less fundamental shifts in spaciousness of soundstage, differing transducers display it fundamentally. YMMV
"Regarding discussion of various technologies which produce the "holographic" soundstage, I have found no greater technology than the Omnidirectional speaker."

Agree, though as mentioned it is still quite possible with more directional designs as well with proper setup.

ALso certainly quality speaker designs including use of quality transducers are key. Poor quality in the speakers will likely greatly limit or mostly prohibit what might be obtained via other subsequent tweaks including to power otherwise.
I agree with Sabai that “holography” is difficult to achieve.

I agree with Newbee that ‘holography’ needs to be better defined.

I agree with Kijanki that shorter cables are usually better.

I agree with Al that shorter cables are not always better.

I agree with Douglas that daisy chaining cables produces a lot of confounding variables.

I agree with Al that cable performance is highly system dependent.

I agree with Mapman that good speaker placement improves “holography.”

I agree with Onhwy61 that good room acoustics improve “holography.”

I agree with Douglas that omnidirectional speakers improve “holography.”

I agree with Orpheus that the degrees of “holography” never end.

I agree with Csontos that Sabai might achieve even more "holography" if he changed his ratio of spending on tweaks vs. equipment.

I agree with Douglas that Sabai's experimental creativity should be commended.

I’m feeling agreeable today.

Bryon
"I agree with Al that shorter cables are not always better"

He mentioned exception of digital cables related to timing of the reflections, but shorter analog cables should always be better. I've never heard of anybody claiming improvement with longer analog audio cable, other than salesmen trying to find excuse to sell more common longer cable (1m vs. 0.75m or 0.5m IC) that he has in stock.
Mapman, I agree that either dynamic speakers or omni's can meet someone's expectations of holography.

But to get there one needs to thoroughly understand how the speaker propogates its sound and how the room will react to the sound. IMHO this is the most difficult aspect of audio and the one, which when absent, will most often keep folks from achieving anything much more than a pedestrian sense of 'soundstaging' certainly not anything aproaching holography as very well described by Sabai in his response to me. Clearly he understands how I define holography.

At the risk of being a pedant, or sounding pedestrian in this group, Omni's are very difficult to set up because one has to deal actively with the back wave, albeit there is much less problem with first reflections points.

Dynamic speakers (not dipole ones) are on one hand easier to set up and achieve an adequate sound stage (thought by many to be excellent) but which are handicapped by the user's lack of understanding of all of the set up issues. They know that they are lacking something but don't know what that might be so they fuel the tweak industry seeking the holy grail when all they really had to do was move the speakers a bit to deal with first reflections, including toe in which, by the way, is far more important than many think - folks seem to do this only to adjust tonal balance, not realizing the effect of first reflections off side walls and ceiling.

For example, many manufacturers recommend that speakers be set up so that they fire straight down the room. Why do they do this? Apart from possibly reflecting consideration for the speakers response on and off axis, because the first reflections off the adjacent walls will make an 'apparent' wider sound stage.

In the real world (mine anyway) i.e. our typical room, what this means is that the speakers have to be placed quite a few feet from the side walls resulting an adequate space between them to keep from rendering a congested center image, especially considering when the sweet spot is set up, but hey its wide! Consider that the only sound that should appear outside the speakers is out of phase sounds!

In that same room, you can place a dynamic speaker very close to the side walls (so long as it is not near a second room boundry (corner/back wall) IF you toe the speaker in so it crosses in front of the listener in his sweet spot and if necessary deaden the side wall surface adjacent to the speaker. That can easily create an uncongested stereo image which is as wide as the room behind the speakers, and incidentially because of the sound arrival time of each speaker create a much wider 'sweet' spot. It can also diffuse ceiling reflections as well which can be beneficial depending on height and surface. It can also produce a great sense of depth dependent on the space behind the speaker, the quality of the drivers and electronics, and lastly, IMHO, the effectiveness of any tweaks.

So, IMHO, as a practical matter it isn't nearly as important which type of speaker one selects as it is how well he understands them and how to use them in his room. Actually this is fairly scientific and predictible for those with the energy to research and learn.

FWIW.