Whats the best Cartridge for a bright Pro-ject 9 ?


I just got a Pro-ject 9 here on Audiogon about 3 weeks ago. I'm having trouble matching a cartridge with it. It sounds high pitched and very analytical with a Sumiko Blue Point on it. The Blue Point sounded great on my Nad 533 but sounds wrong on the Pro-ject 9. The bass sounds bloated and the highs have a hiss and there is hardly any mid range. The turntable is in great condition. Someone recommended the Ruby CL by Sound Smith but I fear it won't warm up the sound. The previous owner recommended a Grado. Any more recommendations?
128x128zeal
I really like my Pro-ject tube box II with my Pro-ject Xpression III table. I am running an Ortofon MC-3 turbo now but hope to go to a Benz Micro Gold next.

Scott
I have the high output Dynavector. I'm looking to get a new phono amp. A friend of mine suggested the battery powered Nova. Any more suggestions? I thought the PS Audio was to edgy.
Make sure Bluepoint is well broken in and the VTA is not too high. Sounds like you might have both problems. I've got the Sumiko Blackbird and it's wonderful with my Pro-ject RM10.

Dave
Can anyone recommend a good phono pre amp?
Almost anything will be an upgrade to the MF X-LPSv3. I found that it lacked any sense of warmth, three dimensional soundstage or lifelike realism when compared to an EAR 834P, Wright WPP100c, WPP200c, and Hagerman Cornet2. Other phono stages that easily outperform the X-LPS are: Jolida JD-9a, Pro-Ject Tube Box SE, Grado PH-1, Bottlehead Seduction, Juicy Music Tercel, AES/Cary PH-1

Is your Dynavector DV 20x high or low output?
Since I wrote my question my system has warmed up quite a bit. I do have it connected to the 47hz output. I'm still using the Music Fidelity XLPSv3 phono pre amp which has more warmth then the PS Audio GCPH I borrowed but not as much detail. The PS Audio GCPH has its own volume control so you can run it straight to a amp or Rogue Audio mono blocks like I do. Can anyone recommend a good phono pre amp? My Music Fidelity is nice but not the best when it comes to detail , the PS Audio is too edgy and brighter then the Music Fidelity. Remember I'm using a Dynavecter 20x high output.
07-13-08: Stringreen
Your question is rife with crazy making. I have discovered that the balancing act of using a bright component with a rolled off contrasting component introduces additional problems to the system.
Boy, you got that right! A couple months ago I got a Cambridge Audio 640P phono section. This is pretty linear, but on the fast and detailed side. The specs rate the RIAA curve accuracy out to 50KHz. Anyway, I tried feeding it to a Hafler Series 915 JFET class A line stage that was reputedly "designed to sound like a tube stage" and the result was just weird.

The speed and detail of the 640P somehow got turned into a sort of tubby, rubbery presentation, and I didn't get the full potential out of the 640P until I fed it into a similarly fast, linear, wideband line stage.
06-27-08: Headsnappin
Zeal, try lowering the back of the arm as dynavectors correct vta is a touch low in the back.
I absolutely agree! This has a profound effect on the balance between leading edges and detail on one hand and the bloom and body of the sound on the other. Lower your arm 2-3 mm and see what you get. Your ideal sound may be literally "under your nose."

If Pro-Ject's arm height adjuster is too much hassle, put a spacer between the cartridge and headshell, or put on a thicker mat. You could even cut out a few 12" circles of cardboard and stack 'em under your mat until you start hearing the shift in tonality.
Your question is rife with crazy making. I have discovered that the balancing act of using a bright component with a rolled off contrasting component introduces additional problems to the system. My suggestion is to use components that have flat perspectives. That is the only way to have the whole system working to its best advantage. What I have done in my system is to buy components of a manufacturer whose ideas of good sound matches mine. All these components from the same manufacturer were designed around each other, and therefore they work the best with each other. I have found that choosing excellent components (choose those from The Absolute Sound, Stereophile, etc. top 10 list), putting these components together can give you quite an awful sounding system....the strengths of each of these components being mitigated by the other components. ...jut a thought....
How about a smooth sounding moving magnet such as a Shure M97XE, or a Denon 160 high output moving coil. Both are slightly on the warm side of neutral.
Michael
If you have a 20XL and are running it at 100 Ohms loading with your MF X-LPS than it may sound a tad bright. If you have a 20XH and are running it at 47K it may also sound a little bright. Running the 20XH at 100 Ohms may dampen it too much, but it's worth a try if you haven't already.

For comparison, I'm running a 20XL (on a mmf-7) at 34 Ohms loading (headamp to Rogue Stealth phono stage) with a SS integrated amp and it's sounding darn good right now after about 50 hours of break-in. Detailed yes, bright no, with plenty of low end and mid range.

Tom
Tketcham,
I am using a Pro-ject 9 I bought on Audiogon. the inter connect is a Synergistic Research Looking glass to a Rogue Audio 99 pre amp. I am also using a music fidelity phono amp.
Zeal, try lowering the back of the arm as dynavectors correct vta is a touch low in the back.
Keep the 20X and try a warmer sounding phono stage. Perhaps a tubed unit. One that allows the cartridge to be loaded a bit. If you're after a "warm" sounding system you may have to reconsider the whole chain and not rely on the cartridge to get what you want. The 20Xx is just telling you what's in the groove. The rest of the signal path gets to shape that information to produce the final sound. (You don't specify what you're running so I'm just throwing out suggestions.)

Tom
I finally got a Dynavector DV 20x. It has great detail and great range and a nice sound stage. It covers the whole sound spectrum from the bass to the highs. But there is still a lack of warmth. Any Suggestions
I have a Benz Micro Ace med. on my Project RM5. It sounds anything but bright. Mids are very nicely defined and the bass is tight and tuneful,no bloat. Now your project 9 is a better TT then mine so the Benz should put a smile on your face.